北京化工大学庄俭个人主页-副教授-机电工程学院

论文信息

[+][-]代表性论文

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

[+][-] 2030年

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

[+][-] 2029年

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

[+][-] 2028年

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

[+][-] 2027年

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

[+][-] 2026年

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

[+][-] 2025年

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

[+][-] 2024年

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

[+][-] 2023年

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

[+][-]2023年之前

1. DOI 朱龙,陈子润,赵泽伟,吴大鸣,孙靖尧,刘俸溢,薛庆隆,庄俭
搭载右旋布洛芬缓释型微针的制备及性能测试[期刊论文]，塑料，2023-02-18
2. DOI 方以勒,杜唯佳,林龙,康婷婷,孙靖尧,庄俭
微针葡萄糖传感器的制备与性能研究[期刊论文]，传感器与微系统，2023-01-06
3. DOI 康婷婷,庄俭,林龙,赵泽伟,朱龙,孙靖尧,杨振洲,吴大鸣
PLA美容微针的微注塑中注射速度仿真分析[期刊论文]，塑料，2022-10-18
4. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
5. DOI 张豪,张晓文,李东泰,庄俭,刘颖,Liu, Haichao,吴大鸣,Feng, Jiachun,孙靖尧
Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2022-09-01
6. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
7. DOI 林龙,Wang, Yuqiong,Cai, Minkun,Jiang, Xinran,Hu, Yongyan,Dong, Zaizai,Yin, Dedong,Liu, Yilin,Yang, Shaohua,Liu, Zhiguang,庄俭,Xu, Ye,Guo, Chuan Fei,Chang, Lingqian
Multimicrochannel Microneedle Microporation Platform for Enhanced Intracellular Drug Delivery[期刊论文]，Advanced Functional Materials，2022-05-19
8. DOI 康婷婷,Zhao, Junyi,林龙,朱龙,赵泽伟,黄尧,高小龙,庄俭,孙靖尧,吴大鸣
The synergistic effect of mechanical vibration for skin puncturing using polymeric microneedles[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2022-05-01
9. DOI 朱龙,庄俭,赵泽伟,黄尧,孙靖尧,刘俸溢,薛庆隆,吴大鸣
尖端载药气泡可溶性微针的制备与透皮效果分析[期刊论文]，生物工程学报，2022-03-08
10. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
11. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
12. DOI Sheng, An'an,林龙,Zhu, Jia,庄俭,Li, Jian,Chang, Lingqian,Cheng, Huanyu
Micro/nanodevices for assessment and treatment in stomatology and ophthalmology[期刊论文]，MICROSYSTEMS & NANOENGINEERING，2021-12-29
13. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
14. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
15. DOI 庄俭,孙靖尧,吴大鸣,Liu, Ying,Patil, Rahul Rangrao,Pan, Duo,Guo, Zhanhu
Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger[期刊论文]，ADVANCED COMPOSITES AND HYBRID MATERIALS，2021-03-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 郜王鑫,庄俭,吴大鸣,张嘉荣,黄尧,孙靖尧,鲁元,吴刚强
振动协同作用聚丙烯微针穿刺皮肤分析[期刊论文]，塑料，2020-10-18
18. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
19. DOI 庄俭,孙靖尧,吴大鸣,刘颖,Rahul Rangrao Patil,Duo Pan,Zhanhu Guo
Multi factor analysis on thermal conductive property of metal polymer composite microstructure heat exchanger[期刊论文]，Advanced Composites and Hybrid Materials，2020-10-12
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 司武炎,孙靖尧,何晓祥,黄尧,庄俭,Jiaoxia Zhang,Vignesh Murugadoss,Jincheng Fan,吴大鸣,Zhanhu Guo
Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites[期刊论文]，Journal of Materials Chemistry C，2020-01-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,孙靖尧,庄俭,Gao, Xiaolong,吴大鸣
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly (vol 53, pg 14299, 2018)[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2019-07-01
26. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
27. DOI 孙靖尧,庄俭,Shi, Junfeng,Kormakov, Semen,刘颖,Yang, Zhaogang,吴大鸣
Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics[期刊论文]，J Mater Sci，2019-06-15
28. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
29. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
30. DOI 孙靖尧,Li, Hanwen,黄尧,郑秀婷,刘颖,庄俭,吴大鸣
Simple and Affordable Way To Achieve Polymeric Superhydrophobic Surfaces with Biomimetic Hierarchical Roughness[期刊论文]，ACS OMEGA，2019-02-01
31. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
32. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
33. DOI 梁丽红,陈永康,庄俭
管子管板检测机器人爬行脚的吊装负载能力研究[期刊论文]，北京化工大学学报(自然科学版)，2019-01-20
34. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
35. DOI He, Xiaoxiang,黄尧,刘颖,Zheng, Xiuting,Kormakov, Semen,Sun, Jingyao,庄俭,高小龙,Wu, Daming
Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-10-01
36. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
37. DOI 庄俭,陈永康,张亚军,梁丽红
管子管板检测机器人爬行脚负载能力仿真研究[期刊论文]，机械设计与制造，2018-06-28
38. DOI 何晓详,黄尧,刘颖,郑秀婷,孙靖尧,庄俭,高小龙,吴大鸣
Improved thermal conductivity of polydimethylsiloxane short carbon fiber composites prepared by spatial confining forced network assembly[期刊论文]，JOURNAL OF MATERIALS SCIENCE，2018-06-18
39. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
基于AMESim预塑背压阀的压力特性研究[期刊论文]，中国塑料，2017-12-26
40. DOI 高百超,杨于光,张亚军,庄俭
超高分子量聚乙烯材料注塑工艺参数的优化[期刊论文]，塑料，2017-12-18
41. DOI 王玫,董力群,范一强,张亚军,庄俭
镀有石墨烯层微热压模具电热耦合作用数值仿真[期刊论文]，机械科学与技术，2017-11-07
42. DOI 刘立柱,高杰林,高世权,王兴天,庄俭
双色注塑机开合模液压动态稳定性的研究[期刊论文]，中国塑料，2017-10-26
43. DOI Cai, Jianchen,Jiang, Jinyun,Gao, Feng,Jia, Guangnan,庄俭,唐刚,范一强
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2017-10-01
44. DOI 金志明,张亚军,王新良,ａｃｏｂＷｉｌｌｉａｍｓ,ｈｅｎＬｉu,ＺｈｏｎｇｙｕａｎＨｕａｎ,Ｄ’ＬａｕｒｅｎＦａｌｋｎｅ,Gang Zhou,董力群,庄俭
Micro Stuucture of Injection Molding Machine Mold Clamping Mechanism: Design and Motion Simulation[期刊论文]，CAAI transactions on intelligence technology，2017-09-01
45. DOI 金志明,Zhang, Yajun,董力群,庄俭
Microstructure of injection moulding machine mould clamping mechanism: Design and motion simulation[期刊论文]，CAAI Transactions on Intelligence Technology，2017-09-01
46. DOI 庄俭,贾光南,张亚军,石则满
聚合物微圆柱热压成型工艺实验[期刊论文]，塑料，2017-08-18
47. DOI 宫杨杨,张亚军,庄俭,杨于光,金志明
电动压铸机合模机构的优化设计[期刊论文]，特种铸造及有色合金，2017-05-20
48. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
可穿戴式微流控芯片在体液检测和药物递送中的研究进展[期刊论文]，分析化学，2017-04-06
49. DOI 杜婷婷,张亚军,庄俭,杨于光
多丸片固着磨料研磨高精密光学元件的参数优化[期刊论文]，北京化工大学学报(自然科学版)，2017-03-20
50. DOI 蔡建臣,蒋金云,周兆忠,帅仁明,薛平,庄俭
木粉含量对连续固态挤出自增强PP性能的影响[期刊论文]，工程塑料应用，2017-03-10
51. DOI 范一强,高峰,王玫,庄俭,唐刚,张亚军
Recent Development of Wearable Microfluidics Applied in[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2017-03-01
52. DOI 庄俭,黄漫玲,张亚军,何晓祥,吴大鸣
翅片结构对金属-聚合物散热器散热性能影响的数值模拟研究[期刊论文]，中国科技论文，2017-02-23
53. DOI Sun,Jingyao,庄俭,Jiang,Hui,黄尧,郑秀婷,刘颖,吴大鸣
Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study[期刊论文]，Applied Thermal Engineering，2017-01-01
54. DOI Wang,Huijie,Wu,Daming,刘颖,Xu,Hong,Zheng,Xiuting,庄俭
Effects of silane grafting and crosslinking on MgO/high density polyethylene composites[期刊论文]，Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica，2017-01-01
55. DOI 李世龙,张亚军,金志明,董力群,庄俭
基于ADAMS的微结构注塑机合模系统的仿真分析[期刊论文]，塑料，2016-12-18
56. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的超疏水材料减阻性能研究[期刊论文]，表面技术，2016-11-20
57. DOI 张晓旭,杨于光,张亚军,董力群,金志明,李世龙,庄俭
工艺参数对LCP微连接器翘曲的影响[期刊论文]，塑料，2016-10-18
58. DOI 刘晓彬,杨于光,董力群,庄俭,张亚军
基于遗传算法的全电动注塑机双曲肘内翻式合模机构优化设计[期刊论文]，塑料，2016-10-18
59. DOI 张宇姣,董力群,张亚军,庄俭
基于数值模拟的液滴式微混合器性能研究[期刊论文]，北京化工大学学报(自然科学版)，2016-09-20
60. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
61. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
液滴微流控系统在数字聚合酶链式反应中的应用研究进展[期刊论文]，分析化学，2016-08-15
62. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
63. DOI 曹聪,潘日,张亚军,庄俭,董力群
基于非球面工件曲率的打磨斑均匀性优化方法[期刊论文]，北京化工大学学报(自然科学版)，2016-05-20
64. DOI 范一强,王玫,高峰,庄俭,唐刚,张亚军
Recent Development of Droplet Microfluidics in Digital Polymerase Chain Reaction[期刊论文]，CHINESE JOURNAL OF ANALYTICAL CHEMISTRY，2016-05-17
65. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
66. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
67. DOI jiang hui,庄俭,刘颖,Z. L. Zhao,吴大鸣
Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array[期刊论文]，Mathematical Problems in Engineering，2016-01-15
68. DOI 范一强,Gao,Feng,Li,Huawei,唐刚,庄俭,Yu,Bo
Continuous Size-Dependent Sorting of Ferromagnetic Nanoparticles in Laser-Ablated Microchannel[期刊论文]，Journal of Nanomaterials，2016-01-01
69. DOI He, Daixian,Zhang, Yajun,庄俭,范一强,Zhou, Gang
Numerical Simulation for Optimization of Plastics Process Parameters of Injection Molding Machine Based on Energy Consumption[会议论文]，2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016)，2016-01-01
70. DOI Ding, Jianbiao,Zhang, Yajun,庄俭,Pan, Ri
A Method of Plastic Gear Inspection Based on Machine Vision[会议论文]，PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016)，2016-01-01
71. DOI 刘水星,庄俭,杨于光,张亚军,董力群,金志明
聚碳酸酯在高注射速度下成型超薄导光板的仿真试验分析[期刊论文]，中国塑料，2015-11-26
72. DOI 王生丹,董力群,张亚军,庄俭
聚合物微针的力学行为及应用[期刊论文]，塑料，2015-10-18
73. DOI 庄俭,Huang, Manling,Zhang, Yajun,Wu, Daming,Kuang, Tairong,Xu, Hong,Zhang, Xiaoxu
Preparation of polymeric superhydrophobic surfaces and analysis of their wettability[期刊论文]，HEAT AND MASS TRANSFER，2015-10-01
74. DOI 郝俊娇,潘日,周刚,张亚军,庄俭
高热流密度电子元件中热管散热技术的进展[期刊论文]，化工进展，2015-05-05
75. DOI jiang hui,吴大鸣,庄俭,刘颖,huang changqing
Numerical simulation of metal-plastic composite heat radiator with hemispherical microstructure array[期刊论文]，Frontiers in Heat and Mass Transfer (FHMT)，2015-05-02
76. DOI Meng,Limin,Wu,Daming,He,Xiaoxiang,庄俭
Visualization experiments on extrudate swell behavior at the microscale[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems，2015-03-01
77. DOI Lv Xueyan,Zhang Yajun,Pan Ri,庄俭
Research on Mechanical Manufacturing with Construction of Obstacle Avoidance System for Intelligent Vehicle[会议论文]，3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING (CMME 2015)，2015-01-01
78. DOI 姜辉,吴大鸣,庄俭,刘颖,赵忠里,周保军
LED散热用金属-塑料复合微结构散热器数值模拟[期刊论文]，塑料，2014-12-18
79. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
80. DOI Meng,L.,吴大鸣,He,X.,庄俭
Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel[期刊论文]，Materials Research Innovations，2014-05-01
81. DOI 庄俭,Zhang, Yajun,Wu, Daming,Liu, Lizhu,Sun, Chengjun,王维,Liu, Shuixing
Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
82. DOI Wu, Daming,庄俭,Zhao, Zhongli,Xu, Hong,Huang, Yao,He, Xiaoxiang
Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding[会议论文]，MICRO-NANO TECHNOLOGY XV，2014-01-01
83. DOI 姜辉,吴大鸣,庄俭,刘颖
微结构换热器的研究进展[期刊论文]，塑料，2013-12-18
84. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
85. DOI 庄俭,周刚,李晓卫,杨于光,张亚军,王朝华
基于Moldflow的注射成型与注压成型对比研究[期刊论文]，塑料工业，2013-08-20
86. DOI 李晓卫,周刚,金志明,庄俭,张亚军,王林,汪雄伟
基于有限元分析和实验的注塑机定模板[期刊论文]，塑料，2013-02-18
87. DOI Xue,Ling,Zhou,Gang,Zhang,YaJun,庄俭,Wu,DaMing
Micro injection molding and strength check of polymer micro-needle[会议论文]，Advanced Materials Research，2013-01-01
88. DOI Li,Shi-Bao,Wu,DaMing,刘颖,Zhang,YaJun,庄俭,Zhang,Qiang
Light distribution design on different LED lamp[会议论文]，Advanced Materials Research，2013-01-01

教师个人主页

庄俭

个人简介

教育经历

工作经历

社会职务

社会活动

研究领域

本科生课程

研究生课程

校级项目

纵向项目

横向项目

论文信息

软件著作

专利

荣誉及奖励

招生信息

相关教师