北京化工大学许红个人主页-副教授-机电工程学院

论文信息

[+][-]代表性论文

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

[+][-] 2030年

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

[+][-] 2029年

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

[+][-] 2028年

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

[+][-] 2027年

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

[+][-] 2026年

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

[+][-] 2025年

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

[+][-] 2024年

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

[+][-] 2023年

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

[+][-]2023年之前

1. DOI 付红波,姜勇,Lv, Jian,黄尧,Gai, Zipeng,刘颖,Lee, Pooi See,许红,吴大鸣
Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle[期刊论文]，Advanced Science，2023-03-24
2. DOI 朱龙,庄俭,赵泽伟,刘俸溢,薛庆隆,孙靖尧,黄尧,许红
基于壳聚糖的可控缓释型微针制备与性能评价[期刊论文]，生物工程学报，2022-09-25
3. DOI 付红波,黄尧,刘颖,Li, Fei,Gai, Zipeng,姜勇,高小龙,庄俭,孙靖尧,许红,吴大鸣
Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process[期刊论文]，Composites Science and Technology，2022-07-28
4. DOI 白晓峰,付红波,刘颖,孙靖尧,闫可心,高小龙,许红,杨振洲,吴大鸣,黄尧
A facile approach to fabricate flexible capacitance sensor based on Spatial Confining Forced Network Assembly method for detecting and analyzing large deformation of damping rubber[期刊论文]，JOURNAL OF APPLIED POLYMER SCIENCE，2022-06-05
5. DOI 张冬阳,许红,白晓峰,安瑛,付红波,姜勇,吴大鸣
一种改进的低密度薄壁中空微球预混料均匀性及密度表征方法[期刊论文]，北京化工大学学报(自然科学版)，2022-03-20
6. DOI 白晓峰,杜宇,Gai, Chenhui,郭阳,刘颖,黄尧,许红,吴大鸣,孙靖尧
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors[期刊论文]，Sensors and Actuators A: Physical，2022-03-01
7. DOI 白晓峰,许红,代伊豪,黄尧,赖欣,吴大鸣
基于PDMS基柔性传感器的智能感知系统[期刊论文]，塑料，2022-02-18
8. DOI 白晓峰,Gai, Chenhui,吴大鸣,朱嘉澍,吴刚强,张苗苗,刘颖,孙靖尧,庄俭,黄尧,许红
Intelligent Sensing System of the Car Seat With Flexible Piezoresistive Sensor of Double-Layer Conductive Network[期刊论文]，IEEE SENSORS JOURNAL，2022-02-15
9. DOI 付红波,许红,刘颖,孙靖尧,庄俭,高小龙,McNally, Tony,吴大鸣,黄尧,Wan, Chaoying
A continuous spatial confining process towards high electrical conductivity of elastomer composites with a low percolation threshold[期刊论文]，Composites Science and Technology，2022-02-08
10. DOI 张晓文,张豪,李东泰,许红,黄尧,刘颖,吴大鸣,孙靖尧
Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications[期刊论文]，COMPOSITES PART B-ENGINEERING，2021-11-01
11. DOI 庄俭,杜唯佳,方以勒,许红,黄尧,康婷婷,林龙
基于交联透明质酸的微针制备及性能[期刊论文]，高分子材料科学与工程，2021-10-21
12. DOI 朱嘉澍,Wan, Chaoying,许红,刘颖,庄俭,孙靖尧,高小龙,McNally, Tony,黄尧,吴大鸣
An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers[期刊论文]，COMPOSITES SCIENCE AND TECHNOLOGY，2021-07-28
13. DOI 杜宇,张奇,黄尧,许红,白晓峰,张晓文,张豪,吴大鸣,孙靖尧
Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method[期刊论文]，COMPOSITES COMMUNICATIONS，2021-04-01
14. DOI 黄尧,吴大鸣,许红
GF-A9049826[期刊论文]，GF报告，2020-12-01
15. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，MATERIALS TODAY COMMUNICATIONS，2020-12-01
16. DOI Hao Zhang,Xiaowen Zhang,方舟,黄尧,许红,刘颖,吴大鸣,庄俭,孙靖尧
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review[期刊论文]，Journal of Composites Science，2020-11-29
17. DOI 庄俭,饶峰,吴大鸣,黄尧,许红,郜王鑫,张嘉荣,孙靖尧
Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery[期刊论文]，European Journal of Pharmaceutics and Biopharmaceutics，2020-10-12
18. DOI 付红波,许红,刘颖,Zhaogang Yang,S. Kormakov,吴大鸣,孙靖尧
Overview of injection molding technology for processing polymers and their composites[期刊论文]，ES Materials & Manufacturing，2020-05-20
19. DOI 王淑慧,刘颖,郭阳,鲁元,黄尧,许红,吴大鸣,孙靖尧
Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly[期刊论文]，Materials Today Communications，2020-05-05
20. DOI 陈寿楷,吴大鸣,刘颖,黄尧,许红,郜王鑫,张嘉荣,孙靖尧,庄俭
Optimal scaling analysis of polymeric microneedle length and its effect on transdermal insulin delivery[期刊论文]，JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY，2020-04-01
21. DOI 高孔超,黄尧,吴大鸣,范晓静,苏逢春,许红
基于微纳压印的柔性PDMS薄膜传感器设计[期刊论文]，仪表技术与传感器，2020-03-15
22. DOI 张嘉荣,庄俭,吴大鸣,许红,郜王鑫,孙靖尧
分层可溶性利多卡因聚合物微针的制备与穿刺效果研究[期刊论文]，中国塑料，2019-12-26
23. DOI 孙靖尧,庄俭,刘颖,许红,Jesse Horne,Evan K. Wujcik,刘海超,Jong E. Ryu,吴大鸣,Zhanhu Guo
Development and Application of Hot Embossing in Polymer Processing: A Review[期刊论文]，ES Materials & Manufacturing，2019-12-09
24. DOI He, Xiaoxiang,孙靖尧,庄俭,许红,刘颖,吴大鸣
Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects[期刊论文]，DOSE-RESPONSE，2019-10-01
25. DOI 庄俭,Rao, Feng,Sun, Jingrao,许红,Liu, Yin,Gao, Xiaolong,黄尧,吴大鸣
Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2019-07-01
26. DOI 庄俭,饶峰,孙靖尧,许红,刘颖,高小龙,黄尧,吴大鸣
透皮给药实心微针阵列的紫外压印工艺方法[期刊论文]，高分子材料科学与工程，2019-06-13
27. DOI 谢娟,夏润南,杜红霞,许永权,赵树春,许红,康文通
α-Fe2O3/煤矸石复合光催化剂的制备及其降解五氯酚性能的研究[期刊论文]，无机盐工业，2019-05-17
28. DOI 李楷,吴大鸣,刘颖,曹亚楠,许红,赵中里,孙靖尧
等温等效替代热压印法成型超薄导光板的工艺分析[期刊论文]，发光学报，2019-05-13
29. DOI Li, Kai,Wu, Da-Ming,刘颖,Cao, Ya-Nan,许红,赵中里,孙靖尧
Analyses on Forming Process of Ultrathin Light Guide Plate by Isothermal Equivalent Substitution Hot Embossing[期刊论文]，Faguang Xuebao/Chinese Journal of Luminescence，2019-05-01
30. DOI 姚武昊,许红,吴大鸣,杨晨明
基于ANSYS压电振子结构最优化模拟分析[期刊论文]，塑料，2019-04-18
31. DOI 庄俭,吴大鸣,许红,黄尧,刘颖,孙靖尧
Edge effect in hot embossing and its influence on global pattern replication of polymer-based microneedles[期刊论文]，International Polymer Processing，2019-04-01
32. DOI Yang, Zewen,许红,黄尧,孙靖尧,Wu, Daming,高小龙,Zhang, Yajun
Measuring mechanism and applications of polymer-based flexible sensors[期刊论文]，Sensors，2019-03-02
33. DOI 庄俭,胡伟,范一强,孙靖尧,He, Xiaoxiang,许红,黄尧,吴大鸣
Fabrication and testing of metal/polymer microstructure heat exchangers based on micro embossed molding method[期刊论文]，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2019-02-01
34. DOI 高小龙,黄尧,何晓详,刘颖,许红,吴大鸣,万超英
Mechanically Enhanced Electrical Conductivity of Polydimethylsiloxane-Based Composites by a Hot Embossing Process[期刊论文]，polymers，2019-01-02
35. DOI 庄俭,陈寿楷,许红,刘颖,黄尧,吴大鸣
微注射压缩成型柔性基底微针工艺参数研究[期刊论文]，中国塑料，2018-12-26
36. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
37. DOI 杨泽文,许红,吴大鸣,付红波,刘颖
注射质量重复精度在线测量方法[期刊论文]，中国塑料，2018-11-26
38. DOI 卜慧鹏,吴大鸣,赵中里,许红,刘颖,马廷月
热压成型聚合物实心微针的模具设计[期刊论文]，塑料，2018-10-18
39. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
40. DOI 杨晨明,许红,姚武昊,吴大鸣,张亚军,代伊豪
压电微泵驱动信号及流量影响因素分析[期刊论文]，压电与声光，2018-10-15
41. DOI 曹亚楠,许红,吴大鸣,刘颖,李瑞,马廷月
超薄导光板压印工艺的模拟与实验分析[期刊论文]，塑料，2018-08-18
42. DOI Li, Rui,Wu, Daming,刘颖,王琦,许红,孙靖尧
Static Mechanical Relaxation Characteristics of Polymethyl Methacrylate in Solid-Like State[期刊论文]，Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering，2018-07-01
43. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
44. DOI 许红,董伟玲,杨晨明,张岩,黄尧,吴大鸣,刘颖
管材壁厚动态过程能力指数的在线测量方法[期刊论文]，塑料，2018-06-18
45. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
46. DOI 许红,付红波,董伟玲,杨晨明,吴大鸣,朱红
基于电池输出特性的电动汽车动力性能评价方法研究[期刊论文]，北京化工大学学报(自然科学版)，2018-05-20
47. DOI 许红,Hu, Ning,黄尧,Wu, Daming,刘颖,Liu, Yaolu
Research on the experimental method of measuring internal stress of polymer sheet product by lamb wave[会议论文]，Key Eng Mat，2018-01-01
48. DOI 武敬华,吴大鸣,刘颖,许红,王琦,江冲
聚合物表面纳米蛾眼结构的紫外压印制备工艺及抗反射性能[期刊论文]，高分子材料科学与工程，2017-08-28
49. DOI 吴大鸣,sun jingyao,刘颖,yang zhenzhou,许红,郑秀婷,Pengsheng Gou
Rapid Fabrication of Microstructure on PMMA Substrate by the Plate to Plate Transition-Spanning Isothermal Hot Embossing Method Nearby Glass Transition Temperature[期刊论文]，Polymer Engineering and Science，2017-07-01
50. DOI Wu,Daming,Sun,Jingyao,Liu,Ying,Yang,Zhenzhou,许红,Zheng,Xiuting,Gou,Pengsheng
Rapid fabrication of microstructure on PMMA substrate by the plate to plate Transition-Spanning isothermal hot embossing method nearby glass transition temperature[期刊论文]，Polymer Engineering and Science，2017-03-01
51. DOI 张强,许红,吴大鸣,杨泽文
影响制品重量重复精度主要工艺参数实验分析[期刊论文]，塑料，2016-12-18
52. DOI 黄常清,黄漫玲,张亚军,许红,庄俭
金属-聚合物复合CPU散热器散热性能的影响因素[期刊论文]，塑料，2016-08-18
53. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷
硅烷接枝交联聚烯烃软管材料的制备[期刊论文]，塑料，2016-06-18
54. DOI 庄俭,Huang,Changqing,Zhou,Gang,Liu,Zhiming,许红,吴大鸣,范一强,张亚军
Influence of factors on heat dissipation performance of composite metal-polymer heat exchanger with rectangular microstructure[期刊论文]，Applied Thermal Engineering，2016-06-05
55. DOI 孙靖尧,吴大鸣,刘颖,庄俭,许红,郑秀婷,赵中里
聚合物微纳制造技术[期刊论文]，橡塑技术与装备，2016-05-15
56. DOI 王会杰,吴大鸣,刘颖,许红,郑秀婷,庄俭
硅烷接枝交联对MgO/高密度聚乙烯复合材料性能的影响[期刊论文]，复合材料学报，2016-03-22
57. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
58. DOI 张岩,许红,刘颖,吴大鸣,唐胜德
基于相对声速系数的聚合物薄板表面内应力测量方法[期刊论文]，塑料，2015-12-18
59. DOI 敬鹏生,刘颖,许红,赵中里,吴大鸣,杨振洲,郑秀婷
一种聚合物表面微结构平板热压印连续成型的方法[期刊论文]，塑料，2015-02-18
60. DOI 许红,唐胜德,张亚军,刘颖,吴大鸣,孙成君
超声波声速与聚合物熔体密度的单值性[期刊论文]，中国塑料，2014-09-26
61. DOI 庄俭,吴大鸣,张亚军,许红,赵中里,何晓祥
Investigation on optical property of diffuser with 3D microstructures[期刊论文]，optik，2014-07-01
62. DOI Liu, Y. L.,Hu, N.,许红,Ning, H.,Wu, L. K.
A Real-time Monitoring Technique for Local Plasticity in Metals Based on Lamb Waves and a Directional Actuator/Sensor Set[期刊论文]，CMC-COMPUTERS MATERIALS & CONTINUA，2014-03-01
63. DOI Liu, Yaolu,许红
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors[期刊论文]，SENSORS，2014-02-01
64. DOI 刘科,刘颖,吴大鸣,庄俭,许红,唐胜德
鳞片石墨取向对鳞片石墨/聚丙烯、鳞片石墨/尼龙66复合材料导热性能的影响[期刊论文]，复合材料学报，2013-11-14
65. DOI 刘颖,敬鹏生,吴大鸣,郑秀婷,许红,赵中里,张雪冰
压印成型条件对微透镜结构影响的模拟[期刊论文]，高分子材料科学与工程，2013-11-12
66. DOI 计红艳,刘颖,郑秀婷,赵中里,吴大鸣,许红
微结构对聚合物漫反射性能的影响[期刊论文]，高分子材料科学与工程，2013-11-12
67. DOI 孟宪祎,吴大鸣,许红,党开放
新型辐射末端结合水温自控的供冷性能实验研究[期刊论文]，暖通空调，2013-07-15
68. DOI Zheng,XiuTing,Gao,XiaoLong,Li,ShiBao,Wu,DaMing,Liu,Ying,Zhang,YaJun,许红,Zhou,Yang
Effect of the light diffuser plate of micro V-cut prism structure on the optical property of LED daylight lamp[会议论文]，Advanced Materials Research，2013-01-01
69. DOI Tang,ShengDe,许红,Wu,DaMing,Zhang,YaJun
The method of improving precision of micro injection molding machine temperature control[会议论文]，Applied Mechanics and Materials，2013-01-01
70. DOI 韩科,李增和,许红,吴大鸣
一种新型聚合物熔体动态密度测量方法的研究[期刊论文]，中国塑料，2011-04-26

教师个人主页

许红

个人简介

教育经历

工作经历

社会职务

社会活动

研究领域

本科生课程

研究生课程

校级项目

纵向项目

横向项目

论文信息

软件著作

专利

荣誉及奖励

招生信息

相关教师