罗翔鹏头像

罗翔鹏

副教授

研究方向：先进有限元技术及计算机辅助工程、承压装备及管道设计与分析、金属增材制造与激光制造科学与工程

学历：博士研究生毕业
  • 部门： 机电工程学院
  • ORCID：
  • DBLP：

10 访问

  • 电子邮箱： xiangpengluo9@163.com
  • 办公地址： 行政楼408
  • 个人概况
  • 研究领域
  • 开授课程
  • 科研项目
  • 论文信息
  • 科技成果
  • 荣誉及奖励
  • 招生信息

个人简介

罗翔鹏，博士，副教授，硕士生导师，主讲国家级一流本科课程《过程设备设计》，主要研究方向为先进有限元技术及计算机辅助工程、承压装备及管道设计与分析、金属增材制造与激光制造科学与工程。主持四川省重点研发计划子课题、多项企事业单位科研项目，以第一或通讯作者身份在Engineering Failure Analysis、International Journal of Pressure Vessels and Piping 、Journal of Pressure Vessel Technology 、Metals and Materials International、Journal of Manufacturing Science and Engineering 、Journal of Manufacturing Processes等期刊和ASME PVP压力容器顶级学术会议上发表SCI/EI论文30余篇。担任Additive Manufacturing等领域知名期刊审稿人、教育部学位论文评审专家、中国机械工程学会压力容器分会高级会员。中国大学生机械创新创意大赛毕业设计大赛区域赛优秀指导教师。

教育经历

入学时间 毕业时间 学位授予单位 学历
2012-09-01 2017-03-31 浙江大学 博士研究生毕业
2009-09-01 2012-07-01 北京化工大学 硕士研究生毕业
2005-09-01 2009-07-01 北京化工大学 大学本科毕业

工作经历

起始年月 截止年月 所在单位名称
2019-07-18 至今 北京化工大学
2017-06-22 2019-07-18 北京化工大学

社会职务

社会活动

研究领域

先进有限元技术及计算机辅助工程

承压装备及管道设计与分析

金属增材制造与激光制造科学与工程

本科生课程

课程名称 开课学年 课程总学时 选课人数 课程性质
过程设备设计(Ⅱ) 2023 32 64 专业必修
过程设备设计 2023 64 81 专业必修
过程设备设计(Ⅱ) 2022 32 46 专业必修
过程设备设计(Ⅱ) 2022 32 31 专业必修
过程设备设计(Ⅱ) 2021 32 65 专业必修
过程设备设计(Ⅱ) 2021 32 30 专业必修
过程设备设计(Ⅱ) 2020 32 67 专业必修
过程设备设计(Ⅱ) 2020 32 28 专业必修
过程设备设计(Ⅱ) 2019 32 114 专业必修
过程设备设计(Ⅱ) 2019 32 31 专业必修

研究生课程

课程名称 开课学年 总学时 开课方式
压力容器可靠性设计 2024 24 A公共基础课
压力容器可靠性设计 2023 24 A公共基础课

校级项目

纵向项目

  • 1. 基于数字孪生的金属仿生增材制造原理及关键技术 ，国家自然科学基金项目，项目时间：2023-01-01 至 2027-12-31
  • 2. 高性能铝合金、钛合金高效激光焊接工艺及服役性能评价 ，其他研究项目，项目时间：2022-01-01 至 2023-12-31

横向项目

  • 1. 甲醇裂解制氢净化器A-D的设计 ，其他研究项目，项目时间：2025-03-19 至 2025-12-31
  • 2. FE246补加单体投料槽设备的设计与计算 ，其他研究项目，项目时间：2025-03-01 至 2025-12-31
  • 3. FLY0920 、FLY 2685、FLY 2010项目舱体强度及疲劳分析 ，其他课题，项目时间：2025-01-01 至 2025-12-31
  • 4. ZHJ2024-146 连云港石化项目4种设备施工图设计 ，企事业单位委托科技项目，项目时间：2024-12-20 至 2025-12-31
  • 5. 华电木垒项目 冷热水储罐、液态二氧化碳储罐 2种设备计算、设计 ，企事业单位委托科技项目，项目时间：2024-09-10 至 2024-12-31
  • 6. 液氧站分气包焊缝错边量应力分析 ，无依托项目研究成果，项目时间：2024-08-15 至 2024-12-31
  • 7. 关于成立 “北京化工大学—浙江圣洁钛业科技有限公司 创新转化中心”的协议 ，其他课题，项目时间：2024-08-08 至 2027-12-31
  • 8. 膜壳设备的计算分析 ，其他课题，项目时间：2024-08-01 至 2025-12-31
  • 9. 氮气缓冲罐设计项目 ，其他研究项目，项目时间：2024-07-15 至 2025-05-25
  • 10. 福建古雷150万吨/年乙烯项目装置系列设备设计及疲劳分析 ，企事业单位委托科技项目，项目时间：2024-07-01 至 2024-12-31
  • 11. ZHJ2024-066华陆工程-福建中沙项目3 种设备施工图设计 ，企事业单位委托科技项目，项目时间：2024-06-25 至 2024-12-31
  • 12. 排气连接管道销轴及Y型管道强度分析 ，其他课题，项目时间：2024-06-08 至 2024-12-31
  • 13. 宽域吸气式发动机空气系统试验舱分析计算 ，主管部门科技项目，项目时间：2024-05-20 至 2030-12-31
  • 14. 新型深远海漂浮式风电平台及氢能综合利用技术研究外委工作 ，企事业单位委托科技项目，项目时间：2024-05-17 至 2025-10-31
  • 15. 提浓塔、预提浓塔支撑结构研究分析 ，企事业单位委托科技项目，项目时间：2024-05-12 至 2024-12-31
  • 16. 超重力温控系统换热器仿真优化 ，其他研究项目，项目时间：2024-04-30 至 2024-10-31
  • 17. V-35229循环缓冲罐设备有限元分析 ，其他研究项目，项目时间：2024-04-08 至 2024-12-31
  • 18. C型密封环密封技术特性研究 ，企事业单位委托科技项目，项目时间：2024-03-15 至 2024-12-31
  • 19. FLY0920项目舱体强度及疲劳分析 ，其他课题，项目时间：2024-03-11 至 2024-12-31
  • 20. 氧化釜设备有限元分析 ，其他研究项目，项目时间：2024-03-01 至 2024-12-31
  • 21. 华锦碳四装置SAD分析设计 ，企事业单位委托科技项目，项目时间：2024-01-15 至 2024-12-31
  • 22. ELNR104BA×2管壳式冷凝器错边量应力分析 ，其他课题，项目时间：2023-12-26 至 2024-12-31
  • 23. 中低温蒸汽能量高效利用技术研究 ，企事业单位委托科技项目，项目时间：2023-11-15 至 2024-11-30
  • 24. 废水废气处理用承压设备系列产品设计 ，企事业单位委托科技项目，项目时间：2023-08-01 至 2025-07-31
  • 25. 胶囊蓄压器静态动态仿真分析 ，企事业单位委托科技项目，项目时间：2023-07-30 至 2025-12-31
  • 26. 汽化器（E1202）管板及换热管分析设计 ，其他课题，项目时间：2023-07-05 至 2023-12-31
  • 27. 科瑞BYS22056项目吸附塔交变载荷疲劳分析 ，企事业单位委托科技项目，项目时间：2023-02-28 至 2023-12-31
  • 28. CP.22.0097压力炉壳的分析设计与计算 ，无依托项目研究成果，项目时间：2022-10-01 至 2023-12-31
  • 29. 不同氢气压力下4130X钢氢致开裂应力强度因子门槛值测试 ，其他课题，项目时间：2022-10-01 至 2023-12-31
  • 30. 空心金属O型环及密封结构有限元计算 ，企事业单位委托科技项目，项目时间：2022-09-29 至 2023-06-30
  • 31. 车载液氢气瓶有限元分析 ，企事业单位委托科技项目，项目时间：2022-01-10 至 2022-05-30
  • 32. 氟塑料密封数值模拟分析 ，其他研究项目，项目时间：2021-11-01 至 2022-12-31
  • 33. 航天用实验前舱与后舱分析计算 ，企事业单位委托科技项目，项目时间：2021-10-28 至 2022-12-31
  • 34. 高速机和重载机容器力学分析计算 ，企事业单位委托科技项目，项目时间：2021-08-30 至 2023-12-31
  • 35. 两套闭锁料斗过滤器（ME-102）的设计 ，企事业单位委托科技项目，项目时间：2020-01-01 至 2020-12-31

论文信息

[+][-]代表性论文
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
[+][-] 2030年
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
[+][-] 2029年
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
[+][-] 2028年
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
[+][-] 2027年
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
[+][-] 2026年
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
[+][-] 2025年
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
[+][-] 2024年
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
[+][-] 2023年
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
[+][-]2023年之前
  • 1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
    Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
  • 2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
    Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
  • 3. DOI 段成红,王志高,罗翔鹏
    矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
  • 4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
    压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
  • 5. DOI 刘镇溪,段成红,罗翔鹏
    附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
  • 6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
    Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
  • 7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
    残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
  • 8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
    Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
  • 9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
    Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
  • 10. DOI 段成红,吴港本,罗翔鹏
    基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
  • 11. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
    Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
  • 12. DOI 罗翔鹏,李正驰,段成红,陆明万
    基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
  • 13. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
    基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
  • 14. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
  • 15. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
    高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
  • 16. DOI 段成红,王波,罗翔鹏,李芳妍
    囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
  • 17. DOI 段成红,张向兵,陆明万,罗翔鹏
    Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
  • 18. DOI 段成红,刘镇溪,罗翔鹏
    压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
  • 19. DOI 段成红,吴港本,罗翔鹏
    三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
  • 20. DOI 段成红,汪尊武,罗翔鹏
    钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
  • 21. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
    激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
  • 22. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
    硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
  • 23. DOI 段成红,吴港本,罗翔鹏,王波
    异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
  • 24. DOI 段成红,曹先堃,罗翔鹏
    Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
  • 25. DOI 赵明皇,段成红,罗翔鹏
    Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
  • 26. DOI 段成红,张银洲,罗翔鹏
    Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
  • 27. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
    石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
  • 28. DOI 段成红,王志高,池瀚林,罗翔鹏
    催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
  • 29. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
    Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
  • 30. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
    Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 31. DOI 段成红,曹先堃,赵明皇,罗翔鹏
    Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
  • 32. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
    Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
  • 33. DOI 曹先堃,罗翔鹏,段成红
    激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
  • 34. DOI 曹先堃,段成红,罗翔鹏
    Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
  • 35. DOI 张向兵,段成红,陆明万,罗翔鹏
    管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
  • 36. DOI 段成红,曹先堃,罗翔鹏
    Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 37. DOI 段成红,赵明皇,罗翔鹏
    Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
  • 38. DOI 段成红,翁志伟,罗翔鹏,池瀚林
    激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
  • 39. DOI 鲍磊,王鹏,于安峰,赵明皇,罗翔鹏
    微通道内预混乙烯-空气火焰传播和流通特性[期刊论文]，消防科学与技术，2021-02-15
  • 40. DOI 汪尊武,段成红,罗翔鹏
    Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 41. DOI 张向兵,段成红,罗翔鹏,黄金豪
    A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
  • 42. DOI 段成红,陈晓奎,罗翔鹏
    激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
  • 43. DOI 张睿明,罗翔鹏
    布管方式对U形管式换热器管板强度的影响研究[期刊论文]，压力容器，2020-09-30
  • 44. DOI 段成红,Zhao, Minghuang,罗翔鹏
    Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
  • 45. DOI Zhao, Minghuang,段成红,罗翔鹏
    Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
  • 46. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
    Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
  • 47. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
    基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
  • 48. DOI 段成红,Han, Xiangxiang,罗翔鹏
    A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
  • 49. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
    Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
  • 50. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
    A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
  • 51. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
    WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
  • 52. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
    Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
  • 53. DOI 段成红,李佳毅,裴亚田,罗翔鹏
    不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
  • 54. DOI 段成红,郝晓杰,罗翔鹏
    选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
  • 55. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
    Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01

软件著作

专利

  • 1. 一种防止塑性垮塌和过度塑性变形的二元准则分析系统
  • 2. 一种基于增材制造技术的可重复利用轮胎模具制造方法
  • 3. 一种应用有限元软件分析C形隧道管强度及稳定性的方法
  • 4. 一种防止塑性垮塌和过度塑性变形的二元准则分析设计方法

荣誉及奖励

招生信息