北京化工大学段成红个人主页-教授-机电工程学院

论文信息

[+][-]代表性论文

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

[+][-] 2030年

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

[+][-] 2029年

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

[+][-] 2028年

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

[+][-] 2027年

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

[+][-] 2026年

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

[+][-] 2025年

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

[+][-] 2024年

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

[+][-] 2023年

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

[+][-]2023年之前

1. DOI 段成红,郝晓杰,罗翔鹏,曹先堃,徐航程,朱宗涛
Microstructure and fatigue properties of laser-MIG hybrid welding of medium-thickness 6005A aluminum alloy[期刊论文]，Engineering Failure Analysis，2024-11-01
2. DOI 曹先堃,段成红,罗翔鹏,郑少鹏,郝晓杰,尚大智,张志辉
Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel[期刊论文]，Journal of Manufacturing Processes，2024-06-15
3. DOI 段成红,王志高,罗翔鹏
矩形大开孔外压薄壁圆柱壳结构稳定性研究[期刊论文]，化工机械，2024-04-20
4. DOI 李正驰,罗翔鹏,段成红,陆明万,陈志伟
压力容器及容器-管道系统的安定载荷计算方法对比[期刊论文]，压力容器，2024-03-30
5. DOI 刘镇溪,段成红,罗翔鹏
附加弯矩对金属O形环法兰密封性能的影响研究[期刊论文]，化工机械，2023-12-20
6. DOI 尚大智,段成红,罗翔鹏,曹先堃,郝晓杰
Numerical and Experimental Study on the Fatigue Behavior of X80 Steel Treated by Biomimetic Laser Shock Peening[期刊论文]，Journal of Materials Engineering and Performance，2023-11-16
7. DOI 段成红,尚大智,罗翔鹏,池瀚林,曹先堃,郝晓杰
残余应力对定向能量沉积不锈钢件疲劳裂纹扩展速率的影响机制研究[期刊论文]，中国激光，2023-10-08
8. DOI 段成红,尚大智,罗翔鹏,郝晓杰,曹先堃
Effects of residual stress induced by laser shock peening on fatigue crack propagation behavior in directed energy deposition stainless steel[期刊论文]，steel research international，2023-09-02
9. DOI 段成红,曹先堃,罗翔鹏,尚大智,郝晓杰
Multi-physics investigations on the gas-powder flow and the molten pool dynamics during directed energy deposition process[期刊论文]，Journal of Manufacturing Science and Engineering，2023-08-18
10. DOI 张洪笙,Ruijun Hao,Xingang Liu,Ning Zhang,Chengjun Liu,Yifeng Liu,段成红,Manman Qiao,Jiyun Qin
Thermodynamic and economic evaluation on a novel cogeneration system based on energy sectionalized closed utilization method[期刊论文]，APPLIED THERMAL ENGINEERING，2023-07-20
11. DOI 段成红,吴港本,罗翔鹏
基于DIGIMAT的碳纤维增强环氧树脂编织复合材料的力学性能[期刊论文]，纺织学报，2023-07-15
12. DOI 段成红,尚大智,罗翔鹏,冯爱新,曹先堃,郝晓杰
Effects of shot peening residual stresses on fatigue crack propagation behavior of 316L[期刊论文]，Journal of Laser Applications，2023-07-12
13. DOI 罗翔鹏,李正驰,段成红,陆明万
基于弹塑性分析的局部过度应变评定方法及其应用[期刊论文]，压力容器，2023-06-30
14. DOI 段成红,吴港本,罗翔鹏,吕晨瑞
基于ANSYS Workbench的圆筒体非径向接管补强方法研究[期刊论文]，化工机械，2023-06-20
15. DOI 潘鑫,姚剑飞,冯坤,钱才富,于洪杰,王维民,段成红
基于科教融合的过程装备与控制工程专业教学实验开发与实践[会议论文]，第十八届全国高等学校过程装备与控制工程专业教学与科研校际交流会论文集，2023-06-01
16. DOI 李超,段成红,Qi, Yan-chang,Sun, Yi-fan,Ma, Cheng-yong
Effect of shielding gas on MIG welding performance with austenitic wire[期刊论文]，Materials Letters，2023-05-15
17. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积稀释率对重熔行为与致密度的影响[期刊论文]，材料导报，2023-03-24
18. DOI 段成红,王福军,罗翔鹏,禹成祥,李正驰,卢鹏旭
高压筒体大直径双开孔补强分析及优化设计[期刊论文]，压力容器，2023-02-28
19. DOI 段成红,王波,罗翔鹏,李芳妍
囊式蓄能器橡胶球囊屈曲失稳变形研究[期刊论文]，机床与液压，2022-12-28
20. DOI 段成红,张向兵,陆明万,罗翔鹏
Load release ratio method for design of thermo-expanded piping-vessel system[期刊论文]，International Journal of Pressure Vessels and Piping，2022-12-01
21. DOI 段成红,刘镇溪,罗翔鹏
压力容器活套法兰连接中金属O形密封环接触特性研究[期刊论文]，中国化工装备，2022-11-18
22. DOI 段成红,吴港本,罗翔鹏
三维机织复合材料力学性能的研究进展[期刊论文]，毛纺科技，2022-11-16
23. DOI 段成红,汪尊武,罗翔鹏
钢制矩形截面容器数值分析及应力测试试验研究[期刊论文]，机械设计，2022-09-20
24. DOI 段成红,池瀚林,罗翔鹏,宫鹏杰
激光熔化沉积参数对316L单道几何特征的影响[期刊论文]，激光与红外，2022-09-20
25. DOI 张洪笙,刘新港,Hao, Ruijun,Liu, Chengjun,刘义峰,段成红,Qin, Jiyun
Thermodynamic performance study on gas-steam cogeneration systems with different configurations based on condensed waste heat utilization[期刊论文]，ENERGY，2022-07-01
26. DOI 段成红,李芳妍,罗翔鹏,王波,王福军,刘镇溪
硅橡胶减振器的非线性随机振动分析[期刊论文]，弹性体，2022-06-25
27. DOI 段成红,吴港本,罗翔鹏,王波
异径三通管热-流-固耦合分析及其结构优化[期刊论文]，化工机械，2022-06-20
28. DOI 姚剑飞,钱才富,王维民,于洪杰,段成红,潘鑫
新工科建设背景下过程装备与控制工程专业实验教学改革与实践[期刊论文]，化工高等教育，2022-02-28
29. DOI 段成红,曹先堃,罗翔鹏
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition[期刊论文]，Journal of Laser Applications，2022-02-01
30. DOI 赵明皇,段成红,罗翔鹏
Heat Transfer, Laser Remelting/Premelting Behavior and Metallurgical Bonding During Selective Laser Melting of Metal Powder[期刊论文]，Metals and Materials International，2021-12-21
31. DOI 段成红,张银洲,罗翔鹏
Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition[会议论文]，Journal of Physics: Conference Series，2021-12-02
32. DOI 段成红,池瀚林,陈晓奎,罗翔鹏
石化设备激光清洗应用研究[期刊论文]，应用激光，2021-08-25
33. DOI 段成红,王志高,池瀚林,罗翔鹏
催化剂选区激光加热装置研发[期刊论文]，应用激光，2021-08-25
34. DOI 张洪笙,刘新港,刘义峰,段成红,窦站,Qin, Jiyun
Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant[期刊论文]，ENERGY，2021-08-15
35. DOI 段成红,汪尊武,黄金豪,罗翔鹏,Lu, Mingwan
Dual assessment criterion and its programmed application of collapse failure of pressure vessels[期刊论文]，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING，2021-08-01
36. DOI 段成红,曹先堃,赵明皇,罗翔鹏
Research on deformation prediction method of laser melting deposited large-sized parts based on inherent strain method[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
37. DOI 段成红,翁志伟,罗翔鹏,韩翔翔,赵明皇
Study on fatigue crack growth of laser melting deposited 12CrNi2 alloy steel based on XFEM[会议论文]，Advanced Materials, Processing and Testing Technology II - Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology, AMPTT 2020，2021-07-20
38. DOI 张向兵,段成红,Lu, Mingwan,罗翔鹏
Application of load release factor method in thermal expansion load imposed on vessel nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2021-07-13
39. DOI 张洪笙,Hu, Eric,段成红,Qin, Jiyun
An improved model to evaluate the performance of solar-aided power generation plants[期刊论文]，INTERNATIONAL JOURNAL OF GREEN ENERGY，2021-07-01
40. DOI 曹先堃,罗翔鹏,段成红
激光增材制造工业级构件变形快速预测方法研究[期刊论文]，应用激光，2021-06-25
41. DOI 曹先堃,段成红,罗翔鹏
Efficient Simulation Methods for Thermal-Mechanical Coupled Analysis and Rapid Residual Distortion Prediction of Laser Melting Deposition Process[期刊论文]，STEEL RESEARCH INTERNATIONAL，2021-05-01
42. DOI 张向兵,段成红,陆明万,罗翔鹏
管系弹性跟随效应对容器-接管连接的应力分析评定影响研究[期刊论文]，压力容器，2021-04-30
43. DOI 段成红,曹先堃,罗翔鹏
Efficient Distortion Prediction of Laser Melting Deposited Industrial-scale Parts Using Modified Inherent Strain Method[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
44. DOI 段成红,赵明皇,罗翔鹏
Study on typical defects and cracking characteristics of tool steel fabricated by laser 3D printing[会议论文]，IOP Conference Series: Earth and Environmental Science，2021-04-09
45. DOI 段成红,翁志伟,罗翔鹏,池瀚林
激光熔化沉积高合金钢疲劳裂纹扩展研究[期刊论文]，激光技术，2021-03-31
46. DOI 汪尊武,段成红,罗翔鹏
Strength analysis and influence factors research of carbon-fiber wound composite gas cylinder with aluminum liner[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
47. DOI 张向兵,段成红,罗翔鹏,黄金豪
A comparative study on the sub-model method and the local model method in the tightness analysis of tube-to-tubesheet joints of heat exchanger[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2020-12-01
48. DOI 段成红,陈晓奎,罗翔鹏
激光清洗在石化领域的应用前景浅析[期刊论文]，光电工程，2020-11-15
49. DOI 段成红,Zhao, Minghuang,罗翔鹏
Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder[期刊论文]，STEEL RESEARCH INTERNATIONAL，2020-08-01
50. DOI Zhao, Minghuang,段成红,罗翔鹏
Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[期刊论文]，JOURNAL OF LASER APPLICATIONS，2020-05-01
51. DOI 罗翔鹏,Zhao, Minghuang,Li, Jiayi,段成红
Numerical Study on Thermodynamic Behavior during Selective Laser Melting of 24CrNiMo Alloy Steel[期刊论文]，MATERIALS，2020-01-01
52. DOI 段成红,高庆东,刘观日,张健,罗翔鹏
基于Workbench的隧道管结构优化设计[期刊论文]，压力容器，2019-10-30
53. DOI 段成红,Han, Xiangxiang,罗翔鹏
A New Fatigue Analysis Method for Rotating Parts Based on Fatigue Cumulative Damage Criterion[会议论文]，IOP Conference Series: Materials Science and Engineering，2019-10-21
54. DOI 段成红,Hao, Xiaojie,Pei, Yatian,罗翔鹏
Stress Wave and Residual Stress Characteristics of TC17 Titanium Alloy Subjected to Warm Laser Shock Peening[期刊论文]，ADVANCED ENGINEERING MATERIALS，2019-02-01
55. DOI Li, Jiayi,段成红,Zhao, Minghuang,罗翔鹏
A Review of Metal Additive Manufacturing Application and Numerical Simulation[会议论文]，2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION，2019-01-01
56. DOI 段成红,Wei, Xinchen,Huang, Jinhao,Lu, Mingwan
CONSTRUCTION OF 3D PRIMARY STRUCTURE AND STRESS CLASSIFICATION OF CYLINDRICAL SHELL WITH NOZZLE[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3A，2019-01-01
57. DOI Huang, Jinhao,段成红,Wu, Liang,罗翔鹏
WINDING-AUTOFRETTAGE STUDY ON REINFORCED THERMOPLASTICS VESSEL BASED ON ANSYS ACP[会议论文]，PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A，2019-01-01
58. DOI Zhao, Minghuang,段成红,Li, Jiayi,罗翔鹏
Deformation and Residual Stress Characteristics of TC17 Alloy Subjected to Laser Shock Peening with Single and Double Sides[会议论文]，2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING，2019-01-01
59. DOI 段成红,李佳毅,裴亚田,罗翔鹏
不同路径及曲率激光冲击TC17残余应力分布研究[期刊论文]，激光杂志，2018-11-25
60. DOI 段成红,郝晓杰,罗翔鹏
选区激光熔化316L温度场研究[期刊论文]，应用激光，2018-10-15
61. DOI 段成红,周俊景,裴亚田,罗翔鹏
TC17钛合金单双面激光冲击残余应力分布研究[期刊论文]，激光技术，2018-07-18
62. DOI 陈立芳,王维民,张娅,段成红
基于装备发展新趋势的工程实践能力培养[期刊论文]，化工高等教育，2018-02-02
63. DOI 段成红,X., Wei,J., Huang,M., Lu
Construction of 3D primary structure and stress classification of cylindrical shell with nozzle[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2018-01-01
64. DOI 段成红,Huang, Jinhao,Wu, Liang,罗翔鹏
Fine Modeling of Reinforced Thermoplastic Filament Winding Container[会议论文]，6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018)，2018-01-01
65. DOI 刘东,魏昕辰,段成红
大高颈比塔器的诱导振动分析[会议论文]，，2017-11-19
66. DOI Yatian Pei,段成红
Study on stress-wave propagation and residual stress distribution of TI-17 titanium alloy by laser shock peening[期刊论文]，J. Appl. Phys.，2017-11-16
67. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
68. DOI Xinchen Wei,段成红
Derivation of reliability formula design for cylinder-elliptical head structure[期刊论文]，Materials Science and Engineering，2017-09-01
69. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
70. DOI Xinchen Wei,段成红
Application of Primary Structure Method in Design of Flat Cover Cylinder Structure[会议论文]，Advances in Engineering Research，2017-08-26
71. DOI 段成红,Xing-Xu Li,Yu Sun,Ming-Wan Lu
Load and Resistance Factor Design of Dual Criterion against Gross Plastic Deformation and Collapse[会议论文]，ASME 2017 Pressure Vessels and Piping Conference Volume 1B: Codes and Standards，2017-07-16
72. DOI 段成红,Sun,Yu,Lu,Ming-Wan
Zero Curvature Method and Protection Criterion Against Plastic Collapse[期刊论文]，Journal of Pressure Vessel Technology, Transactions of the ASME，2017-06-01
73. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
74. DOI Xingxu Li,段成红
Design of Pressure Vessel Cylinder Based on Reliability Analysis[会议论文]，Advances in Engineering Research，2017-06-01
75. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
76. DOI Liang Wu,段成红,Jinhao Huang
Study on The Stability of Fiber Reinforced Thermoplastic Vessel Liner[会议论文]，Advances in Engineering Research，2017-05-13
77. DOI Zhai, Xiao-Yu,Pan, Liang-Liang,Li, Si-Qi,Ding, Yu-Feng,Yang, He-Jia,段成红,江新华,孟庆云,熊金平
Analysis and Investigation of Electronic Transport Coulomb Blockade in Al-68 Based on DFT[期刊论文]，JOURNAL OF THE CHINESE CHEMICAL SOCIETY，2017-04-01
78. DOI 陆明万,段成红,孙禹
防止塑性垮塌的新准则[期刊论文]，压力容器，2017-01-30
79. DOI 段成红,Li, Xing-Xu,Sun, Yu,Lu, Ming-Wan
Load and resistance factor design of dual criterion against gross plastic deformation and collapse[会议论文]，American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP，2017-01-01
80. DOI 李涛,段成红
换热管与管板连接接头的液压胀接压力分析[期刊论文]，化工机械，2016-12-15
81. DOI 李志平,段成红
波纹管的极限载荷分析[期刊论文]，化工装备技术，2016-10-10
82. DOI Sun, Yu,段成红,Lu, Ming-Wan
Strain linearization for structural strain evaluation and maximum equivalent structural strain criterion[期刊论文]，INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING，2016-10-01
83. DOI 李志平,段成红
外压波纹管的稳定性分析[期刊论文]，石油和化工设备，2016-07-15
84. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
85. DOI Tao Li,段成红
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints[会议论文]，Energy Science and Applied Technology，2016-06-25
86. DOI 杨星辰,张雅琴,段成红
基于ASME Ⅷ-1的大直径固定管板式换热器管板的简化分析[期刊论文]，压力容器，2016-04-30
87. DOI 李志平,段成红
基于ASME Ⅷ-2的外压波纹管分析计算[期刊论文]，压力容器，2016-02-29
88. DOI 杨星辰,张雅琴,段成红
压力容器应力分析单元选择的探讨[期刊论文]，化工设备与管道，2016-02-15
89. DOI Hu, Dan,段成红,Sha, Yuan
Transverse damage simulation and analysis of carbon nanotube reinforced composite[会议论文]，PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTING TECHNOLOGY，2016-01-01
90. DOI Wu, Liang,段成红,Hu, Dan
Influencing Factors of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，Proceedings of the 2016 4th International Conference on Machinery, Materials and Information Technology Applications，2016-01-01
91. DOI Hu, Dan,段成红
Simulation and Analysis of Transverse Interface Cracking of Carbon Fiber Reinforced Composite[会议论文]，PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND COMPUTER SCIENCE，2016-01-01
92. DOI Sha,Y.,段成红
Effective properties prediction of carbon nanotubes reinforced nanomaterials[会议论文]，Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015，2016-01-01
93. DOI 裴亚田,段成红
“卓越工程师计划”培养模式探索——以学生视角体验“卓越工程师计划”[期刊论文]，化工高等教育，2015-08-31
94. DOI 孙禹,段成红,陆明万
直接法中确定主结构应变方法的讨论[期刊论文]，压力容器，2015-02-28
95. DOI 段成红,You-Liang Hu
Design and analysis of a large horizontal vessel supported on multiple saddles according to three-moment theorem and Zick's method[期刊论文]，Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering，2014-09-02
96. DOI Sha,Yuan,段成红,Huang,Da
Micro crack transverse propagation simulation of carbon fiber reinforced composites[会议论文]，Advanced Materials Research，2014-01-01
97. DOI 段成红,钱才富,蔡纪宁,何亚东,王维民,颜廷俊
打造一流的工程教育体系—北京化工大学过程装备与控制工程专业“卓越工程师计划”建设与实践[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
98. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
99. DOI 彭星铭,段成红
中国散裂中子源靶站氦容器结构分析和对比研究[会议论文]，第十三届全国高校过程装备与控制工程专业教学与科研校际交流会论文集，2013-08-10
100. DOI 贾晓龙,Chen, Gang,于运花,李刚,Zhu, Jinming,Luo, Xiangpeng,段成红,杨小平,Hui, David
Effect of geometric factor, winding angle and pre-crack angle on quasi-static crushing behavior of filament wound CFRP cylinder[期刊论文]，COMPOSITES PART B-ENGINEERING，2013-02-01
101. DOI Huang,Da,段成红
Buckling analysis of carbon fiber reinforced plastics cylinders under axial compression[会议论文]，Applied Mechanics and Materials，2013-01-01
102. DOI Zhang, Nan,段成红
Property prediction of composites with different fiber volume fractions by representative volume element method[会议论文]，APPLIED MECHANICS AND MATERIALS I, PTS 1-3，2013-01-01
103. DOI 罗翔鹏,段成红,吴祥,陈罡,贾晓龙,杨小平
复合材料螺旋缠绕圆筒壳轴向压缩性能有限元分析[期刊论文]，玻璃钢/复合材料，2012-09-28
104. DOI 胡涛,段成红
高压烧结炉齿啮式卡箍锁紧结构优化设计[期刊论文]，化工机械，2012-08-15
105. DOI 段成红,吴祥,罗翔鹏
碳纤维缠绕复合气瓶爆破压力的有限元分析[期刊论文]，玻璃钢/复合材料，2012-03-28
106. DOI 段成红,Luo, Xiangpeng,Zhang, Nan
Stress and Strain Analysis of Composite Gas Cylinder Based on ABAQUS[会议论文]，ADVANCED MATERIALS AND PROCESSES II, PTS 1-3，2012-01-01

教师个人主页

段成红

个人简介

教育经历

工作经历

社会职务

社会活动

研究领域

本科生课程

研究生课程

校级项目

纵向项目

横向项目

论文信息

软件著作

专利

荣誉及奖励

招生信息

相关教师