IntroductionBasic Information Li Shuangxi, Professor, Han nationality, born in 1977.04. Tel: 13691418726; E-mail: buctlsx@126.com Address: Box 36, Beijing University of Chemical Technology, No.15, Beisanhuan East Road, Chaoyang District, Beijing, China Position: Deputy Director, Institute of Chemical Equipment Design, Beijing University of Chemical Technology; Secretary General of Chemical Specialty Seal Standardisation Committee; Deputy Secretary General of National Mechanical Seal Standardisation Committee. Study experience: School and time of doctoral graduation: Beijing University of Chemical Technology 2011.07 School and time of overseas exchange visit: State University of New York, USA 2014.4~2014.10 Work experience: 2003.04 to present: Beijing University of Chemical Technology, School of Electromechanical Engineering. Research Direction: Deputy Secretary General of National Mechanical Seal Standardisation Committee, Chairman of Seal Standardisation Committee for Chemical Industry.Engaged in non-standard high parameter fluid seal research work, for enterprises and institutions to solve a large number of gas and liquid sealing problems.Another major research area is the research of chemical vessel equipment, as the deputy director of the Institute of Chemical Equipment Design, Beijing University of Chemical Technology, with three types of pressure vessel audit qualification certificate, pressure vessel analysis and design qualification certificate. EducationWork ExperienceSocial PositionSocial ActivitiesResearch1. Fluid sealing: dynamic and static sealing technology under extreme conditions such as high speed, high (low) temperature, high pressure and special media. 2. Pressure vessel: conventional design, stress analysis, vibration analysis of various pressure vessels, specific pressure vessel three types of audit qualification, pressure vessel analysis and design qualification. 3. Straw steam explosion: for renewable agricultural products - corn, wheat and other straw development of biomass cellulose continuous steam explosion pretreatment technology and equipment. Teaching
PostgraduatesFundingVertical projects 1. Mechanical Seal Service Performance Evolution Mechanism and Reliability Assessment Method (2018YFB2000800) , National Key R&D Programme, Project Time: 2019-07-01 to 2022-06-30 2. XJZ2024120076 , Science and Technology Project of the competent authority, Project Time: 2024-11-25 to 2026-11-25 3. XJZ2024070043 , Other Departments of the State Council, Project Time: 2024-06-16 to 2025-12-30 4. XJZ2024010019, science and technology project of the competent department, project duration: 2023-01-01 to 2025-06-01 5. Development Strategy for Prevention of Major Accidents and Intrinsic Safety of Petrochemical Equipment, Other Departments of the State Council, Project Period: 2020-01-01 to 2020-12-31 6. Development of Underwater Two-Phase Wet Flow Device , Other Departments of the State Council, Project Time: 2016-05-23 to 2017-12-30 7 Research on Intrinsically Safe, Reliable and Intelligent Countermeasures for Refining and Chemical Enterprises, other departments, Project Time: 2016-01-01 to 2017-10-31 8 Compressor Group Self-Healing Principle Failure Targeting Inhibition Method (After Three Years) , 973 Programme, Project Time: 2014-01-01 to 2016-08-31 9. Continuous Tubular Advection Technology for Continuous Enzymatic Digestion , 863 Programme, Project Time: 2012-11-30 to 2015-12-01 Horizontal projects 1. 90kg solid state hydrogen storage device design, commissioned by enterprises and institutions, project time: 2024-12-12 to 2024-12-12 2. Finite element simulation analysis of typical fluorosilicone rubber combination seals, commissioned by the enterprise and institution, project time: 2024-12-11 to 2025-12-30 3. Simulation analysis of C-shaped cleanliness ring sealing structure, commissioned by the enterprise and institution, Project Time: 2024-12-06 to 2025-12-30 4. Development of Filter Selection Software, a scientific and technological project commissioned by enterprises and institutions, project time: 2024-11-16 to 2025-12-30 5. Fire analysis and seismic analysis of cover plate, commissioned by enterprises and institutions, project time: 2024-11-13 to 2025-12-30 6. Analysis of sealing mechanism and performance simulation of gas-liquid buffer, commissioned by enterprises and institutions, Project Time: 2024-10-01 to 2025-12-30 7. Research and development of dynamic sealing device of gap insensitive sealing element based on variable geometry adjustment, entrusted by enterprises and institutions, Project time: 2024-09-27 to 2025-06-06 8. Design and analysis of sealing system for underwater multiphase booster pump , commissioned by enterprises and institutions, project time: 2024-09-03 to 2026-12-31 9. Analysis of conventional safety and island fire-fighting scheme, entrusted by enterprise and public institution, project time: 2024-08-28 to 2024-12-30 10. XJH2024110076, entrusted by enterprises and institutions, project time: 2024-07-31 to 2024-12-31 11. Mechanical seals for turbine pumps end face dynamic groove processing, enterprises and institutions entrusted with science and technology projects, project time: 2024-07-03 to 2025-06-30 12. Liquid automatic sampling device magnetic fluid seal , enterprises and institutions entrusted with science and technology projects, project time: 2024-06-30 to 2024-12-30 13. optimisation and improvement of screeder sealing device , enterprise and public institution entrusted science and technology project, project time: 2024-06-21 to 2025-12-30 14. Development of mechanical seal engineering prototype for filter device, commissioned by enterprises and institutions, project time: 2024-06-20 to 2025-12-30 15 low-temperature dynamic seal test of turbine pump, enterprise and public institution entrusted science and technology projects, project time: 2024-06-05 to 2024-12-30 16. 1800-64 Hydraulic kettle vessel open hole stress analysis, enterprise and public institution entrusted science and technology projects, project time: 2024-06-03 to 2024-12-30 17. XJH2024070036, entrusted by enterprises and institutions, project time: 2024-06-01 to 2024-12-30 18. ZEF50 Vessel Analysis and Evaluation, entrusted by enterprises and institutions, Project Time: 2024-05-01 to 2024-12-30 19 Dynamic and static testing of graphite sealing device, commissioned by enterprises and institutions, project time: 2024-04-08 to 2024-12-30 20. XJH2024040009, entrusted by enterprises and institutions, project period: 2024-03-16 to 2024-12-30 21. Mechanical seal end face dynamic groove machining for turbine pumps, commissioned by enterprises and institutions, project time: 2024-03-07 to 2024-12-30 22. XJH2024020007, entrusted by enterprises and institutions, Project Time: 2024-02-02 to 2024-12-30 23 Upstream Pumping Seal Design, commissioned by enterprises and institutions, Project Time: 2024-01-18 to 2025-12-31 24. low-temperature turbine seal system design, manufacturing and testing, enterprises and institutions entrusted with science and technology projects, project time: 2023-12-15 to 2024-12-16 25. nuclear power safety valve simulation calculation, enterprises and institutions entrusted with science and technology projects, project time: 2023-12-13 to 2024-06-30 26. high-speed magnetic liquid sealing pressure test, enterprises and institutions entrusted with science and technology projects, project time: 2023-12-06 to 2024-12-31 27. drying chamber simulation design and consulting services, enterprises and institutions entrusted with science and technology projects, project time: 2023-11-26 to 2024-12-30 28. Stefan rubber-plastic combination seals finite element simulation module software design and friction and wear test, enterprises and institutions entrusted with science and technology projects, project time: 2023-11-08 to 2024-12-31 29. Improved high temperature, high pressure and high speed dynamic seal development, enterprises and institutions entrusted with science and technology projects, project time: 2023-10-16 to 2023-12-30 30. turbo pump mechanical seal end face dynamic groove processing, enterprises and institutions entrusted with science and technology projects, project time: 2023-09-01 to 2024-08-31 31. solid hydrogen storage system design, commissioned by enterprises and institutions, project time: 2023-08-26 to 2023-12-30 32. Stress analysis of test chamber, entrusted by the enterprise and institution, project time: 2023-08-22 to 2023-12-30 33. Heat Transfer Analysis of Thermal Insulation Cover, commissioned by the enterprise and public institution, project time: 2023-07-10 to 2023-12-31 34. high temperature, high pressure and high speed dynamic seal development, enterprises and institutions entrusted with science and technology projects, project time: 2023-07-07 to 2023-12-30 35. Dalian constant force disc support stress analysis and elasticity test evaluation, enterprises and institutions entrusted with science and technology projects, project time: 2023-06-23 to 2023-12-30 36. kettle dry friction mechanical seal technology and typical mechanical seal structure selection and parametric design analysis software development, enterprises and institutions entrusted with science and technology projects, project time: 2023-06-15 to 2026-12-30 37. Beijing University of Chemical Technology-Zhejiang Lantian Mechanical Seals Co., Ltd Mechanical Seal Technology Joint R&D Centre, entrusted by enterprises and institutions, project time: 2023-06-15 to 2026-12-30 38. 43.94 BB system Venturi CFD simulation calculation, entrusted by enterprises and institutions, project time: 2023-06-06 to 2023-09-30 39. Seal Test of High Altitude Flapper End Seal Assembly, Booster Pump End Seal Assembly, Improved 3# Seal Assembly, Commissioned by Enterprise and Public Institution, Project Time: 2023-06-05 to 2023-12-30 40. Finite Element Calculation of Rotary Lip Seal , Project Time: 2023-05-15 to 2023-12-30 41. Seismic analysis of the lift door in hot room, commissioned by the enterprise and institution, project time: 2023-05-12 to 2023-12-30 42. Life Test of Graphite Tightening Device, commissioned by the enterprise, Project Time: 2023-05-10 to 2023-12-30 43. 43.94 CFD Simulation Analysis of the Breakage Mechanism of Cartridge Bridges, a project commissioned by the enterprise, project time: 2023-04-25 to 2023-07-31 44. Durability test of the preferred option of end seal, commissioned by the enterprise and institution, project time: 2023-03-28 to 2023-12-31 45. Research on the performance analysis and optimisation method of magnetic sealing device, commissioned by enterprises and institutions, project time: 2023-03-16 to 2024-12-31 46. Friction and Wear Performance Test of Rubber Materials under Different Conditions, commissioned by enterprises and institutions, Project Time: 2023-03-15 to 2023-12-30 47. 3D Model Modelling of Ship Hull, a project commissioned by the enterprise and public institution, Project Period: 2023-03-02 to 2023-12-31 48. Simulation of Low Temperature Turbine Rotor-Bearing Performance, commissioned by the enterprise and institution, project time: 2023-02-27 to 2024-04-16 49. Numerical simulation of flow field of air intake device and system, commissioned by enterprises and institutions, project time: 2022-12-26 to 2023-12-31 50. Simulation of Metal O-ring Seal Structure with 41 Inside Diameter Openings, Project time: 2022-11-30 to 2023-11-30 51. Procurement of Visible Grid Model for Ships, commissioned by enterprises and institutions, project time: 2022-11-02 to 2023-12-30 52 Finite element calculation of spool high and low temperature characteristics, commissioned by the enterprise and public institutions, project time: 2022-10-15 to 2023-06-30 53. Structural design and calculation of shear principle test device and end cutting principle test device, commissioned by enterprises and institutions, project time: 2022-09-20 to 2023-12-30 54 Mechanical seal end face dynamic pressure groove processing for turbine pumps, commissioned by enterprises and institutions, Project Time: 2022-08-22 to 2023-08-22 55. Strength analysis of special spreader, commissioned by the enterprise and public institution, project time: 2022-08-20 to 2022-12-30 56. Stress Analysis and Evaluation of M30 Jaw Bolts, commissioned by the enterprise and public institution, Project Time: 2022-08-19 to 2022-12-30 57. Composite sealing ring life test after aging, entrusted by enterprises and institutions, project time: 2022-08-15 to 2022-12-30 58. Spring Performance Test of Combined Seal, commissioned by enterprises and institutions, Project Period: 2022-08-15 to 2022-12-30 59. 2022 Intellectual Property Service Contract, commissioned by enterprises and institutions, Project Period: 2022-08-01 to 2022-12-30 60. Pu line single eight-stage centrifugal extractor research prototype development , enterprises and institutions entrusted with science and technology projects, project time: 2022-07-08 to 2022-12-31 61. Friction and wear test under seawater environment, commissioned by enterprises and institutions, project time: 2022-07-04 to 2022-12-31 62. Research and development of gasoline adsorption and desulphurisation device filter, entrusted by the enterprise and institution, project time: 2022-06-06 to 2022-12-30 63 Non-metallic Seal Simulation and Analysis Module, commissioned by the enterprise and public institution, Project Time: 2022-06-02 to 2022-12-31 64. Test contract for coupling bellows end seal assembly, entrusted by enterprise and institution, project time: 2022-03-02 to 2022-12-30 65. KY21074 Simulation calculation and test of universal coupling, commissioned by enterprises and institutions, Project Period: 2022-01-14 to 2022-12-30 66 large enamelled assembled tank key technology research and development, enterprises and institutions entrusted with science and technology projects, project time: 2021-12-31 to 2021-12-31 67 High-pressure hydrogen equipment FEA calculation and design-35MPa, entrusted by enterprises and institutions science and technology projects, project time: 2021-12-30 to 2022-12-29 68. Commutator overall design and performance analysis, enterprises and institutions entrusted with science and technology projects, project time: 2021-12-01 to 2022-12-31 69 nuclear power equipment seismic analysis and evaluation, enterprises and institutions entrusted with science and technology projects, project time: 2021-11-30 to 2022-12-30 70 pipeline deformation under high temperature and high pressure finite element simulation and test verification, enterprises and institutions entrusted with science and technology projects, project time: 2021-11-25 to 2022-12-30 71. JG2021063, entrusted by enterprises and institutions, Project Time: 2021-11-25 to 2022-12-30 72. JG2021062, Entrusted by enterprises and institutions, Project Period: 2021-11-25 to 2022-12-30 73 Study on the influence of sealing end face temperature rise on sealing ring deformation under different sealing specific pressure conditions, entrusted by enterprises and institutions, Project time: 2021-11-25 to 2022-12-30 74 ZEF mechanical seal design optimisation and prototype manufacturing and validation, entrusted by enterprises and institutions, project time: 2021-11-15 to 2022-11-14 75 Jiangsu XUANDA CPF260 Stress Analysis and Evaluation, commissioned by enterprises and institutions, Project Time: 2021-11-15 to 2022-04-20 76. Filter stress analysis and evaluation, commissioned by enterprises and institutions, project time: 2021-10-28 to 2022-10-27 77. Finite Element Calculation of Domesticated Accumulator Ring, a scientific and technological project entrusted by the enterprise and institution, project time: 2021-10-20 to 2022-07-30 78. Calculation of Pressure Drop of 3AC/5AC/8AC Products with Empty Shell and Cartridge and Mimetic Analysis of Fluid Flow in 8AC, Project commissioned by enterprises and institutions, Project Period: 2021-10-18 to 2022-10-17 79. JG2021051, entrusted by enterprises and institutions, project time: 2021-10-15 to 2021-12-30 80. Finite Element Analysis of Domesticated Flooded Seal, entrusted by enterprises and institutions, project time: 2021-10-15 to 2022-06-30 81. Research on Development of High-temperature Sliding Bearing, commissioned by enterprises and institutions, project time: 2021-09-10 to 2022-09-09 82 Qinghe Oil Slurry, Fuel Oil Filter and Pressure Stabilising Tank Design, a scientific and technological project entrusted by enterprises and institutions, Project Time: 2021-08-26 to 2021-12-31 83 High-speed turbine pump rotary dynamic seal technology research and development, enterprises and institutions entrusted with science and technology projects, project time: 2021-07-26 to 2022-12-30 84 high temperature ball valve thermodynamic simulation analysis, enterprises and institutions entrusted with science and technology projects, project time: 2021-07-21 to 2021-12-31 85 Mechanical seal end face dynamic pressure groove processing for turbine pumps, commissioned by the enterprise and public institutions science and technology projects, project time: 2021-07-14 to 2022-07-14 86. FEA Calculation and Design of High Pressure Hydrogen Equipment, commissioned by Enterprise and Public Institution, Project Period: 2021-06-18 to 2022-12-31 87. JG2021024, entrusted by enterprises and institutions, project time: 2021-06-06 to 2021-12-30 88. 07.118 CPF240 Pipe Nozzle Load Stress Analysis and Evaluation, entrusted by enterprises and institutions, project time: 2021-04-21 to 2021-12-31 89. Mechanical and Magnetic Seal Comparative Measurement Test (CIMM), commissioned by the enterprise and institution, project time: 2021-04-21 to 2021-12-31 90. 43.52CPF200 shell/jacket stress analysis and evaluation, commissioned by enterprises and institutions, project time: 2021-04-21 to 2022-07-01 91. T670YC15-ASA Filter Analysis and Stress Evaluation , Science and Technology Project commissioned by enterprises and institutions, Project Time: 2021-04-12 to 2021-12-31 92. Research and development of homogeniser sealing and cooling equipment and test stand, entrusted by enterprise and public institution, project time: 2021-04-01 to 2021-04-01 93. Seal Durability Verification System for Integrated Motor, commissioned by enterprise and public institution, project time: 2021-03-31 to 2021-12-31 94 Mechanical Seal HKM2-69a and Magnetic Seal HKM1-C28 Comparison Test, commissioned by enterprises and institutions, Project Period: 2021-03-25 to 2021-12-31 95 room temperature face seal using spiral groove dynamic pressure form adaptability analysis and design improvement, enterprises and institutions entrusted with science and technology projects, project time: 2021-03-20 to 2021-12-31 96 mechanical seal 1 and magnetic seal 3 than test, enterprises and institutions entrusted with science and technology projects, project time: 2021-03-15 to 2021-12-31 97 dissolver feed automatic switching device research prototype design and calculation analysis, enterprises and institutions entrusted with science and technology projects, project time: 2021-01-15 to 2022-12-31 98. JG2021025, entrusted by enterprises and institutions, project time: 2021-01-01 to 2021-12-31 99. Haining Hengyi CPF250 Stress Analysis and Evaluation, commissioned by enterprises and institutions, Project Time: 2020-12-05 to 2021-12-31 100. JG2021010, entrusted by enterprises and institutions, project time: 2020-12-01 to 2021-06-25 101. 3D Sample Inspection and Documentation Report, entrusted by enterprises and institutions, Project Time: 2020-11-03 to 2021-12-30 102. Parametric Design and Limit Fitting Calculation of Combined Seals, commissioned by enterprises and institutions, Project Time: 2020-10-30 to 2021-12-31 103. Research and Development of Integrated Monitoring and Diagnosis of Oil Transport Pump Unit and Pump Evaluation Model, commissioned by enterprises and institutions, Project Time: 2020-09-25 to 2022-09-30 104. Stress analysis of Kunpeng filter, commissioned by enterprises and institutions, project time: 2020-09-08 to 2021-11-08 105. Mechanical Seal End Face Dynamic Pressure Groove Processing for Turbine Pumps, no dependent project research results, project time: 2020-07-20 to 2021-07-19 106. high temperature gas face seal design optimisation and product development, enterprises and institutions entrusted science and technology projects, project time: 2020-07-04 to 2021-12-31 107. lip seal ring water running test, sealing ring low temperature test and process simulation, enterprises and institutions entrusted with science and technology projects, project time: 2020-06-07 to 2021-12-31 108. research and development of waste heat recovery system equipment for methanation unit, commissioned by enterprises and institutions, project time: 2020-05-22 to 2021-12-30 109 Xiapu nuclear power project filter stress analysis and evaluation , entrusted by the enterprise and public institution science and technology project, project time: 2020-05-06 to 2021-05-06 110. ZEF30 Filter Stress Analysis and Evaluation, entrusted by enterprises and institutions, Project Time: 2019-09-30 to 2021-09-30 111. R&D of Zorb catalytic gasoline adsorption and desulphurisation device filter , Science and technology project entrusted by enterprises and institutions, Project time: 2019-09-09 to 2019-12-30 112. Analysis and Calculation of 60,000 cubic metre Cryogenic Propane Tanks , Commissioned by Enterprise and Public Institution, Project Time: 2019-03-15 to 2019-07-15 113. Gas-liquid two-phase flow parameter tester machine pressure resistance test , entrusted by the enterprise and public institution science and technology project, project time: 2019-03-02 to 2020-03-02 114. Comprehensive Analysis of Alloy Powder and Gas Impurities , Entrusted by enterprises and institutions, Project Time: 2018-12-26 to 2019-06-26 115. Mechanical seal end face dynamic pressure groove machining for turbine pump , entrusted by enterprises and institutions, project time: 2018-12-26 to 2019-12-26 116. Optimisation of Helium Turbine Face Seal Design and Test Research , Commissioned by Enterprise and Public Institution, Project Time: 2018-11-01 to 2019-12-31 117. Research and Development of Pneumatic Sample Feeder Technology , Commissioned by Enterprise and Public Institution, Project Time: 2018-10-11 to 2019-12-30 118. FSI Filter Stress Analysis and Evaluation , Other topics, Project time: 2018-08-24 to 2019-08-24 119. 2018 Chemical Standardisation Work Grant , Other topics, Project time: 2018-06-06 to 2019-12-31 120. Simulation study on starting characteristics of engine starting process end seal work , National Science and Technology Support Programme, Project Time: 2018-06-01 to 2018-12-31 121. TTB001FI Filter Stress Analysis and Evaluation , Science and Technology Project Commissioned by Enterprises and Institutions, Project Time: 2018-05-25 to 2019-05-24 122. Finite element analysis of V=27L fixed-capacity incendiary bomb structure , entrusted by enterprises and institutions, project time: 2018-05-08 to 2018-12-30 123. Auxiliary Equipment of Launching Equipment Recovery Device , entrusted by enterprises and institutions, project time: 2018-01-10 to 2018-04-10 124. Finite Element Analysis of Local Structure of Disc Filter (ZEF50-VESSEL-1) , Science and Technology Project commissioned by enterprises and institutions, Project Time: 2017-11-08 to 2018-11-07 125. Development of Reusable Fluid Dynamic Pressure Seal , Commissioned by enterprises and institutions, Project Time: 2017-07-22 to 2018-12-31 126. finite element analysis of PCS001FI local structure , commissioned by the enterprise and public institution, project time: 2017-05-25 to 2018-06-05 127. R&D of High Speed Dynamic Seal for Steam Turbine , Project Time: 2017-05-10 to 2017-12-31 128. Research on Structural Reliability of Ultra-large Anaerobic Reactor , Other topics, Project time: 2017-05-05 to 2018-12-31 129. R&D and fatigue study of gasoline adsorption desulphurisation device filter , enterprise and institution entrusted science and technology project, project time: 2017-01-01 to 2018-12-30 130. Stress Analysis and Evaluation of Filter TEU001/002/003/008K , Other topics, Project time: 2016-12-02 to 2017-12-30 131. Beijing University of Chemical Technology - Weihai Xintai Chemical Equipment R & D Centre , entrusted by enterprises and institutions of science and technology projects, project time: 2016-12-01 to 2021-12-31 132 Fangchenggang project protection screen stress analysis and evaluation , enterprises and institutions entrusted science and technology projects, project time: 2016-11-03 to 2016-12-30 133. Launching equipment recycling device, entrusted by enterprises and institutions, project time: 2016-10-31 to 2017-07-30 134. Stress Analysis and Evaluation of Filter , Other projects, Time: 2016-03-25 to 2016-12-30 135. Finite Element Analysis of Structural Stress and Fatigue Stress in Pressure Tank , Project Time: 2016-03-17 to 2016-06-16 136. Finite Element Analysis of Fixed Capacity Incendiary Shell Structure , Project Time: 2016-03-03 to 2016-12-30 137. Finite Element Analysis of the Local Structure of CIS001FI , Project time: 2015-12-21 to 2016-06-08 138. Technology Transfer of Magnetic Lipids Preparation , Project Period: 2015-12-20 to 2016-12-20 139. Finite Element Analysis of Local Structures of Hot Press Tanks, from 2015-09-08 to 2016-09-08 140. Finite Element Analysis of AP1000 Local Structures , Time: 2015-08-04 to 2015-09-04 141 Underwater Magnetic Seal R&D , Project time: 2015-05-20 to 2016-05-20 142. Characterisation of grey slag , Project time: 2015-03-01 to 2015-09-30 143. 7EHD10481-771-[] Series Filter Fatigue Analysis , Project time: 2015-02-27 to 2015-04-03 144. R&D of Y-shape Filter , Project Time: 2015-02-06 to 2015-06-06 145. Finite Element Analysis of Local Structure of BF08F-3G33H2-A600637 , Project Time: 2015-01-20 to 2015-03-20 146. Development of Alcohol-Power Cogeneration Technology Process Package , Project Time: 2014-12-01 to 2015-12-31 147. Research and development of gasoline adsorption and desulphurisation device filter and fatigue study , Project time: 2014-10-25 to 2015-05-25 148. Research and Development of Hydrogen Storage Alloy Tank Outer Tank Structure , Project Period: 2014-05-08 to 2014-12-31 149. AP1000 local structure finite element analysis , Project time: 2014-04-16 to 2015-04-16 150. 56.2 cubic metre LNG storage tank outer cylinder structure research and development , Project time: 2014-04-08 to 2014-12-31 151 Large Combined Injection Septic Tank Structure R&D , Project Period: 2014-01-01 to 2014-04-30 152 Research on Environmental Adaptability of Chlorohydrin Rubber to Metal , Project Time: 2014-01-01 to 2015-12-30 153. Simulation Analysis of Flow Field of Multi-stage Pump Axial Force Balancing Technology , Project Period: 2014-01-01 to 2014-04-20 154 R&D of LNG storage tank outer cylinder structure , Project Time: 2013-04-08 to 2013-06-30 155 Research on sealing specific pressure of Ф20 calibre typical valve , Project Time: 2013-03-10 to 2013-12-30 156 shear device shear tool fixed bolt force measurement device test , Project Time: 2013-01-08 to 2013-12-31 157. R&D and Fatigue Analysis of Desulphurisation Unit Filter , Project Period: 2012-07-20 to 2013-12-20 158. Finite Element Stress Analysis of Gas Cylinder Bottom Type , Project Time：2012-07-01 to 2012-12-30 159. Finite Element Analysis of Local Structure of Disc Filter (ZEF50) , Project Time: 2012-05-15 to 2013-05-15 160. R&D of TRT Blower Seal , Project Time: 2011-08-16 to 2011-11-30 161. R&D of Crystalline Seal for Injection Grade Glucose Solution , Project Period: 2011-07-26 to 2011-09-30 162. Integrated Screw Pressure Vapour Blast Device Pilot Test , Project Period: 2011-07-07 to 2012-07-07 163. Stress Analysis of Ammonia Synthesis Tower, Project Time: 2011-01-01 to 2011-04-30 164. SCS remote pressure/flow control valve and regulator development , Project time: 2011-01-01 to 2011-12-31 165. Design of non-standard equipment such as storage tanks , Project Time: 2010-07-04 to 2010-12-31 166 liquid oxygen paraffin engine oxygen pump low temperature dry gas seal development , Project Time: 2010-01-01 to 2010-12-30 167 hydrocarbon tower reboiler and other non-standard equipment design , Project Time: 2009-01-01 to 2009-11-20 168 high temperature dry gas sealing technology research, project time: 2008-02-25 to 2008-12-25 169. Design of non-standard equipments such as phenol condenser, project time: 2007-11-20 to 2008-11-20. 170. R&D and design of non-standard equipment for ethanol membrane dewatering plant, Project Time: 2007-05-22 to 2007-12-30 171. R&D of Stirring and Sealing Device for 12m3 Crystallisation Kettle , Project Time: 2007-04-20 to 2008-04-19 172. 200,000 tonnes/year ethylene glycol technical transformation and supporting project non-standard equipment R & D and design, project time: 2006-01-10 to 2006-12-31 173. Equipment Design and Development for Liaoyang Ethylene Glycol Technology Reform Project, Project Period: 2005-01-08 to 2005-12-31 174. Equipment Development for Isopropylbenzene Suspension Catalytic Distillation Project, Project Period: 2005-01-01 to 2005-12-30 175. Non-standard equipment design for Taikoo Oil Tanks, Project Period: 2003-12-20 to 2004-06-20 176. Non-standard equipment design for tower top tail cooler, project time: 2003-08-20 to 2003-12-31 Vertical ProjectHorizontal ProjectPublications2023 1. DOI Liu, Wei, Liu, Yang, Li, Shuangxi, Zhai, Zhixing Demodulated synchrosqueezing S-transform and its application to machine-fault diagnosis[J], Measurement Science and Technology, 2023 2. DOI Li Shuangxi, Huang Boqi, Liao Haoran, Bi Enzhe, Zhang Jiangten Performance Analysis of Mechanical Seals for Gas-Liquid Two-Phase Lubrication in Aero Engine Bearing Cavity[J], Lubrication and Sealing, 2023 3. DOI Song Yupeng,Li Shuangxi,Sha Lianxiang,Huang Chengyao,Yan Xinxin Temperature rise deformation of high-speed dynamic pressure type expansion ring seal and test research[J], Fan Technology, 2023 4. DOI Liu Dengyu,Zhao Jun,Li Shuangxi,Zhao, Xinni,Huang, Lele Experimental Study on Tribological and Leakage Characteristics of a Rotating Spring-Energised Seal under High and Low Temperature[J], MACHINES, 2023 2022 5. DOI Zheng Rao, Zhang Jingbo, Li Shuangxi, Jia Yuning, Wei Wenhao Analysis of thermal-force coupling deformation and influencing factors on the end face of ship transom double face seal[J], Fluid Machinery, 2022 6. DOI Wei Wenhao,Li Shuangxi,Zhang Jingbo,Yan Xinxin,Song Yupeng Research on the influence of ship transom sealing ring material on sealing performance based on heat-solid coupling[J], Fan Technology, 2022 7. DOI Jia Yuning, Li Shuangxi, Zhang Jingbo, Song Yupeng Numerical simulation and experimental study on the temperature field of hydrostatic dry gas seal[J], Lubrication and sealing, 2022 8. DOI Zheng Rao, Zhao Hanyuan, Li Shuangxi, Huang Boqi, He Mang Study on the phase transition of the flow field at the end face of cryogenic spiral groove seals for aerospace applications[C], Abstracts of the 12th National Academic Conference on Fluid Mechanics, 2022 9. DOI Song Yupeng, Li Shuangxi, Wei Wenhao, Jia Yuning, Zhang Jingbo Temperature rise performance analysis and structure optimisation of hydrostatic gas lubrication seal[C], Abstracts of the 12th National Academic Conference on Fluid Mechanics, 2022 10. DOI Liu Danyu, Zhao Jun, Li Shuangxi Leakage Characteristics of Accumulator Seals Based on Surface Roughness and Hydrodynamic Lubrication[C], Abstracts of the 12th National Academic Conference on Fluid Mechanics, 2022 11. DOI Zheng Rao, Yan Xinxin, Li Shuangxi, Jia Yuning, Huang Chengyao Analysis and experimental research on the performance of hydrostatic gas lubrication seal based on finite element method[C], Abstracts Collection of the 12th National Academic Conference on Fluid Mechanics, 2022 12. DOI Wei Wenhao, Li Shuangxi, Zhang Jingbo, Liu Yang Optimisation of structural parameters of ship transom mechanical seal[C], Abstracts of the 12th National Academic Conference on Fluid Mechanics, 2022 13. DOI Song Zifeng,Li Shuangxi,Lu Jianping,Yang Xing,Huang Chengyao Simulation study on the influence of process parameters on gas-liquid two-phase jet mixing effect in large thin-walled bolted storage tanks[C], Abstracts of the 12th National Academic Conference on Fluid Mechanics, 2022 14. DOI Huang Boqi, Li Shuangxi, Song Zifeng, He Mang, Gu Yanfei Characterisation of multiphase fluid flow at the end face of mechanical seal for ultra-high speed upstream pumping[C], Abstracts of the 12th National Academic Conference on Fluid Mechanics, 2022 15. DOI Huang Chengyao,Li Shuangxi,Song Zifeng,Yan Xinxin Flow field analysis and structural optimisation of large enamelled assembled steel tanks[C], Abstracts of the 12th National Academic Conference on Fluid Mechanics, 2022 16. DOI Yanfei Gu, Jun Zhao, Shuangxi Li, Can Xu, Zhicheng Qi Analysis of the flow characteristics of rotary lip seal opening medium[C], Abstracts of the 12th National Academic Conference on Fluid Mechanics, 2022 17. DOI Yang Haichao, Li Shuangxi, Zhao Xiang, Zhang Guoqing Numerical simulation and experimental validation of the change rule of microscopic leakage channel of mechanical seal in high temperature bearing cavity[C], Abstracts of the Twelfth National Academic Conference on Fluid Mechanics, 2022 18. DOI Liu Wei, Liu Yang, Li Shuangxi, Chen Yangkang A review of variational mode decomposition in seismic data analysis[J], Survey in Geophysics, 2022 19. DOI Liu W, Liu Y, Li Shuangxi Demodulated multisynchrosqueezing S transform for fault diagnosis of rotating machinery[J], IEEE Sensors Journal, 2022 20. DOI Liu Wei, Zhang Shuyao, Chen Kaifang, Li Shuangxi Horizontal reassignment synchrosqueezing transform for time-frequency analysis of seismic data[J], Journal of Seismic Exploration, 2022 21. DOI Zheng Rao, Chen Xiaozhu, Li Shuangxi, Chen Kunyi, Song Zifeng Structure-sensitive parameter analysis of the critical sealing capacity of high-speed spiral seals[J], Fluid Mechanics, 2022 22. DOI Zheng Rao, Zhang Jingbo, Li Shuangxi, Chen Yang, Yan Xinxin, Zhao Xiang Optimised Design of Ship Stern Seal Structure Based on Response Surface Method[J], Mechanical and Electrical Engineering, 2022 23. DOI Zhao, Jun, Gao, Tong, Dang, Jie, Cao, Weiyu, Wang, Zi, Qi, Li, Shuangxi, Shi, Yijun Using Green, Economical, Efficient Two-Dimensional (2D) Talc Nanosheets as Lubricant Additives under Harsh Conditions[J], NANOMATERIALS, 2022 24. DOI Liu W, Shan Xueyin, Li Shuangxi, Wang X, Yao Siyu A rolling bearing fault diagnosis method based on deep fusion model[J], Journal of Beijing University of Chemical Technology (Natural Science Edition), 2022 25. DOI Li Shuangxi,Xu Can,Liu Xinghua,Zhao Xiang,Gu Yanfei Research on sealing characteristics of rotary lip ring parking seal opening whole process[J], Lubrication and Sealing, 2022 2021 26. DOI Sha Lianxiang, Li Shuangxi, Zheng Rao, Ma Yuhu Numerical analysis and experimental study on heat transfer performance of oil and gas two-phase flexible wire brush seals[J], Lubrication and Sealing, 2021 27. DOI Liu W, Shan Xueyin, Li Shuangxi, Zhang Zhihua, Yao Siyu Research on rolling bearing fault diagnosis based on parallel 1DCNN[J], Electromechanical Engineering, 2021 28. DOI Ma Runmei, Zhao Xiang, Li Shuangxi, Chen Xiaozhu, Yang Haichao Study on sealing characteristics and friction wear of floating ring with dynamic pressure type annular valve[J], Propulsion Technology, 2021 29. DOI Li, Zixian, Li Shuangxi, Wang, Xin, Li, Decai Numerical Simulation and Experimental Study on Magnetorheological Fluid Seals With Flexible Pole Pieces[J], IEEE TRANSACTIONS ON MAGNETICS, 2021 30. DOI Ma Runmei, Zhao Xiang, Li Shuangxi, Liu Xinghua, Xu Can Study on thermal coupling deformation and friction wear of mechanical seals for granular media[J], Journal of Chemical Engineering, 2021 31. DOI Zheng Rao, Chen Xiaozhu, Li Shuangxi, Zhao Xiang, Shi Renjie, Song Zifeng Study on the opening characteristics of high-speed air film mounted floating ring seals[J], Journal of Beijing University of Aeronautics and Astronautics, 2021 32. DOI Cheng Tianfu, Li Shuangxi, Ma Yuhu, Chen Kunyi, Shi Renjie Design and Optimisation of Self-tightening Open-ended Static Sealing Ring Structure[J], Lubrication and Sealing, 2021 33. DOI Zhao Jun, Li Qingzhan, Li Shuangxi, Li Shicong, Chen, Guangyan, Liu Xinghua, He, Yongyong, Luo, Jianbin Influence of a carbon-based tribofilm induced by the friction temperature on the tribological properties of impregnated graphite sliding against acemented carbide[J], FRICTION, 2021 34. DOI Li Qingzhan, Li Shuangxi, Zheng Yao, Li Ning, Li Shicong Return pumping seal opening temperature characteristics based on preferred parameters[J], AIR ENGINE, 2021 35. DOI Li Shicong, Qian Caifu, Li Shuangxi, Zhong, Jianfeng, Liu Xinghua Face micro-deformation and its control method of rotating ring of hydrodynamic face seal under high speed, high pressure and wide temperature range[J].Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2021 36. DOI Kunyi Chen, Runmei Ma, Haoran Liao, Renjie Shi, Tianfu Cheng, Shuangxi Li Thermoelastic Deformation of SCO2 Dynamic Seal End Face under High Temperature, High Pressure and High Speed Working Conditions[J], Electromechanical Engineering, 2021 37. DOI Shi Renjie, Zheng Rao, Li Shuangxi, Chen Xiaozhu, Ma Yuhu, Cheng Tianfu Study on transient stability of air film floating ring seal under pressure disturbance[J], Electromechanical Engineering, 2021 38. DOI Ma Runmei, Zhao Xiang, Chen Xiaozhu, Li Shuangxi, Yang Haichao Study on deformation of end face and friction wear of high-speed dry friction mechanical seal[J], Journal of Beijing University of Aeronautics and Astronautics, 2021 39. DOI Xinyu Zhang, Shuangxi Li, Yuya Ma, Qingzhan Li, Nannan Zhang Study on the Performance of Regulated High Pressure Reciprocating Seal for Traction Rope[J], Lubrication and Seal, 2021 40. DOI Li Shuangxi, Ma Yuhu, Zhang Shanyu, Sha Lianxiang, Chen Kunyi, Liao Haoran Numerical analysis and experimental study on heat transfer characteristics of flexible wire brush seals[J], Electromechanical Engineering, 2021 41. DOI Li Shuangxi, Liao Haoran, Chen Lian, Liu Xinghua, Zhao Xiang Analysis of self-oscillation stability of oil and gas two-phase dynamic pressure seals with fluid-solid-thermal coupling[J], Lubrication and Sealing, 2021 42. DOI Ma Yuya, Wang Qingfeng, Shi Renjie, Zhang Xinyu, Li Qingzhan, Li Shuangxi Study on the Floating Performance of Aero-engine Air Membrane Floating Ring Seal[J], Lubrication and Sealing, 2021 43. DOI Ying, Li,Tao, Chen,Xiliang, Wang,Yaolin, Liu,Hang, Zhang,Zhang Qiuxiang,Cai Jining,Li Shuangxi Analysis of mechanical properties of low temperature self-tightening metal u-shaped sealing ring[C], Advances in the Astronautical Sciences, 2021 2020 44. DOI Ma Runmei, Zhao Xiang, Li Shuangxi, Chen Xiaozhu, Yang Haichao Experimental study on leakage characteristics of high-speed gas annular flap type floating ring seal[J], Fan Technology, 2020 45. DOI Zheng Rao,Fu Guangwei,Zhao Xiang,Li Shuangxi Dry friction performance of impregnated graphite/38CrMoAlA (sprayed) paired seal friction pair[J], Lubrication and Sealing, 2020 46. DOI Li Shuangxi, Liao Haoran, Li Shicong, Liu Xinghua Optimisation of structural parameters of dynamic pressure seal end face in spiral groove pump-out type based on fluid-solid-thermal coupling analysis[J], Mechanical and Electrical Engineering, 2020 47. DOI Li Qingzhan, Li Shuangxi, Zheng Yao, Zhong Jianfeng, Li Shicong, Liao Haoran Experimental analysis of the opening process of oil and gas mixed-phase reflux pumping seal structure[J], Aero-engine, 2020 48. DOI Li Shicong,Qian Caifu,Zhao Jun,Li Qingzhan,Li Shuangxi Dry gas seal performance analysis using a hydrodynamic and hydrostatic pressure decoupling method: Part 2[J], Sealing Technology, 2020 49. DOI Feng Ruipeng, Ma Runmei, Song Renlong, Li Shuangxi, Zhang Zhihui Performance analysis of vaporisation phase change of liquid film in dynamic pressure seal with high speed deep cooling medium[J], Fluid Machinery, 2020 50. DOI Ma Runmei,Feng Ruipeng,Li Shuangxi,Wang Jiaxing,Liu Zhiwei,Song Renlong Optimisation analysis of liquid film vaporisation phase change performance of spiral groove dynamic pressure seal[J], Electromechanical Engineering, 2020 51. DOI Wang Jiaxing, Li Shuangxi, Ma Wenjie, Feng Ruipeng, Liu Zhiwei Frictional heat analysis of bearing cavity annular flap type floating ring seal[J], Electromechanical Engineering, 2020 52. DOI Zhang Zhihui,Ma Runmei,Li Shuangxi,Feng Ruipeng,Fu Guangwei Numerical study on the acceleration method of deformation of the end face of inset mechanical seal[J], Mechanical and Electrical Engineering, 2020 53. DOI Li Shicong, Qian Caifu, Zhao Jun, Li Qingzhan, Li Shuangxi Dry gas seal performance analysis using a hydrodynamic and hydrostatic pressure decoupling method[J], Sealing Technology, 2020 54. DOI Li Shicong, Qian Caifu, Zhao Jun, Li Qingzhan, Li Shuangxi Dry gas seal performance analysis using a hydrodynamic and hydrostatic pressure decoupling method: Part 1[J], Sealing Technology, 2020 55. DOI Li Shicong, Qian Caifu, Li Shuangxi, Zhong Jianfeng, Liu Xinghua Research on micro-deformation of dynamic ring end face of high-speed and high-pressure wide-temperature dynamic seal and its improvement method[J], Journal of Beijing University of Aeronautics and Astronautics, 2020 56. DOI Li Qingzhan, Zheng Yao, Li Shuangxi, Chen Lian, Li Shicong Follows dynamic characteristics of oil-gas two-phase hydrodynamic seals based on fluid-solid-thermal coupling[J], Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2020 57. DOI Zhao Jun, Li Qingzhan, Li Shuangxi, Li Shicong, Chen Guangyan, Liu Xinghua, He Yongyong, Luo Jianbin Influence of a carbon-based tribofilm induced by the friction temperature on the tribological properties of impregnated graphite sliding against acemented carbide[J], Friction, 2020 58. DOI Li Qingzhan, Zheng Yao, Li Shuangxi, Chen Lian, Li Shicong Dynamic characteristics of oil and gas two-phase dynamic pressure seals following based on fluid-solid-thermal coupling[J], Journal of Harbin Institute of Technology, 2020 59. DOI Ma Yuhu, Li Shuangxi, Zhang Shanyu, Sha Lianxiang, Shi Renjie Numerical and experimental study on the leakage characteristics of flexible wire brush seals[J], Fluid Machinery, 2020 60. DOI Zhao Jun,Huang, Yiyao,Li, Yingru,Gao, Tong,Dou Zhan,Mao, Junyuan,Wang, Hongdong,He, Yongyong,Li Shuangxi,Luo, Jianbin Superhigh-exfoliation graphene with a unique two-dimensional (2D) microstructure for lubrication application[J], APPLIED SURFACE SCIENCE, 2020 61. DOI Li Shuangxi, Liu Zhiwei, Lu Jianping, Feng Ruipeng, Wang Jiaxing Structural repair and experimental validation of membrane top bolted biogas storage tank roof[J], PRESSURE VESSELS, 2020 62. DOI Li Shicong,Qian Caifu,Li Shuangxi,Chen, Lian Study of thermal-fluid-solid coupling on dynamic characteristics of oil-gas miscible backflow pumping seal[J], Huagong Xuebao/CIESC Journal, 2020 63. DOI Li Shuangxi, Liao Haoran, Li Shicong, Chen Lian, Li Qingzhan, Cheng Tianfu, Chen Kunyi Influence of structural parameters on the bearing characteristics of wave springs[J], Machine Design, 2020 64. DOI Li Shuangxi, Liao Haoran, Li Shicong, Chen Lian, Li Qingzhan, Cheng Tianfu, Chen Kunyi Influence of structural parameters on the bearing characteristics of wave springs[J], Machine Design, 2020 65. DOI Li Qingzhan, Li Shuangxi, Zheng Rao, Ma Wenjie, Zhuang Juguo Sensitive parameters affecting the performance of three-valve high-speed floating ring seals[J], Journal of Beijing University of Aeronautics and Astronautics, 2020 66. DOI Li Qingzhan, Li Shuangxi, Zheng Rao, Ma Wenjie, Zhuang, Suguo Sensitive parameters affecting performance of three-petal high-speed floating-ring seal[J], Beijing Hangkong Hangtian Daxue Xuebao/ Journal ofBeijing University of Aeronautics and Astronautics, 2020 67. DOI Li Shicong, Qian Caifu, Li Shuangxi, Chen Lian Thermal-fluid-solid coupling study on the dynamic characteristics of oil and gas two-phase dynamic pressure seals[J], Journal of Chemical Engineering, 2020 68. DOI Xiao Yunpeng, Li Shuangxi, Li Qingzhan, Fu Guangwei, Li Ning Bench test study on the performance of dry friction mechanical seal end face material pairing[J], Lubrication and Seal, 2020 69. DOI Li, Shicong,Qian Caifu,Li Shuangxi,Li, Qingzhan,Liao, Haoran Study of sealing mechanism of gas-liquid miscible backflow pumping seal[J], TRIBOLOGY INTERNATIONAL, 2020 70. DOI Ma Runmei,Zhu Xinlei,Zhang Nannan,Li Shuangxi Study on the blocking effect of supercritical carbon dioxide gas end face seal[J], LUBRICATION AND SEALING, 2020 Before 2020 71. DOI Li Shuangxi, Chen Lian, Li Huan, Li Shicong, Li Qingzhan Analysis on End-face Temperature of High-speed Oil-Gas Two-Phase Backflow Pumping Seal[C], 2nd International Conference on Mechanical Engineeringand Applied Composite Materials, 2019 72. DOI Li Qingzhan, Zheng Yao, Li Shicong, Chen Lian, Li Shuangxi Comparative analysis and test of gas-liquid two-phase performance of high-speed dynamic pressure seal[J], Journal of Harbin Institute of Technology, 2019 73. DOI Chen Lian,Li Shuangxi,Li Huan,Li Shicong,Li Qingzhan Analysis and experimental verification of end face temperature distribution of oil and gas two-phase reflux pumping seal[J], Lubrication and Sealing, 2019 74. DOI Zhao Jun,Chen Guangyan,He Yongyong,Li Shuangxi,Duan Zhiqiang,Li Yingru,Luo Jianbin A novel route to the synthesis of an Fe 3 O 4/h-BN 2D nanocomposite as a lubricant additive[J], RSC ADVANCES, 2019 75. DOI Zhao Jun,Chen, Guangyan,He, Yongyong,Li Shuangxi,Duan, Zhiqiang,Li, Yingru,Luo, Jianbin A novel route to the synthesis of an Fe3O4/h-BN 2D nanocomposite as a lubricant additive[J], RSC Adv. 2019 76. DOI Ma Lijun, Li Shuangxi, Ma Yuya, Zhang Qiuxiang, Cai Jining Analysis of the influencing factors of the characteristic parameters of air film floating ring seal[J], Fluid Machinery, 2018 77. DOI Sun Xiantong, Jiang Xujiang, Li Shuangxi Finite element analysis of mechanical seal cladding end face cracking[J], Fluid Machinery, 2018 78. DOI Li Ying, Jiang Xuqiang, Yang Jing, Ma Zhimeng, Cai Jining, Li Shuangxi Creep analysis of mechanical seal inlaid static ring during standby process[J], Fluid Machinery, 2018 79. DOI Ma Lijun,Li Shuangxi,Cai Jining,Ma Wenjie Research on radial clearance of high temperature inset floating ring seal[J], Lubrication and sealing, 2018 80. DOI Hongyue Yang,Wenjie Ma,Lan Li,Shuangxi Li Fully shielded metal bellows rotary drive sealing device[J], China Nuclear Power, 2018 81. DOI Li Shuangxi, Sun Xiantong, Zhang Peng Mechanical seal cladding seal ring end face performance analysis[J], Journal of Chemical Engineering, 2018 82. DOI Li Shuangxi, Song Renlong, Xue Caihong, Zheng Rao Measurement sensitivity analysis of oil and gas two-phase venturi flowmeter[J], Petroleum Machinery, 2018 83. DOI Chen, Jie,Li, JingYin,Li Shuangxi,You, YunXiang Implementation of Black Box Models for Internal Ballistics Optimization Using an Artificial Neural Network[J], MATHEMATICAL PROBLEMS IN ENGINEERING, 2018 84. DOI Li Ying, Wang Snap, Guo Wenjun, Du Jiang, Li Shuangxi Analysis of drive performance of fully shielded valve magnetic actuator[J], CHEMICAL MACHINERY, 2017 85. DOI Yin Yuan, Liu Xiangfeng, Cong Guohui, Hu Songtao, Huang Weifeng, Li Shuangxi, Wang Lei Influence of homogeneous groove design on dynamic performance of externally pressurised hydrostatic mechanical seals[J], Fluid Machinery, 2017 86. DOI Zixian Li, Dongsheng Zhang, Yu Zhang, Shuangxi Li Research on temperature field and heat transfer performance of flexible pole-shoe magnetic grease seal[J], Fluid Machinery, 2017 87. DOI Caihong Xue, Hongbo Gao, Yuying Wang, Shuangxi Li Analysis of enhanced flow characteristics in the mechanical seal cavity of Fly ITT submersible mixer[J], Journal of Beijing University of Chemical Technology (Natural Science Edition), 2017 88. DOI Zhang Yi, Li Shuangxi, Wang Haibao, Sun Xiantong Experimental study on pretreatment of lignocellulose by microwave-acidification steam explosion[J], Cellulose Science and Technology, 2017 89. DOI Li Huan, Li Shuangxi, Li Xiaofen, Cai Jining, Zhang Qiuxiang, Wang Lei Multi-parameter orthogonal optimisation and experimental study of oil and gas two-phase dynamic pressure seal end face structure[J], Journal of Beijing University of Chemical Technology (Natural Science Edition), 2017 90. DOI Li Shuangxi, Zhu Qiaofeng, Cai Jining, Zhang Qiuxiang, Jin Zhaoxu Regulatory Performance of Regulatable Dry Gas Seal[J], WSEAS TRANSACTIONS on FLUID MECHANICS, 2016 91. DOI Li Shuangxi, Li Huan, Huang Kesong, Cai Jining, Zhang Qiuxiang Study on Contact State and Contact Stress Distribution of Kettle Mechanical Seal[J], WSEAS TRANSACTIONS on FLUID MECHANICS, 2016 92. DOI Caihong Xue, Rao Zheng, Pengxiang Zhao, Qiuxiang Zhang, Shuangxi Li Simulation of Ethanol Variable Pressure Adsorption Dehydration Process Based on Aspen Adsorption[J], PETROCHEMICAL, 2016 93. DOI Yuying Wang,Jining Cai,Chunhui Zhu,Qiuxiang Zhang,Shuangxi Li Characteristic analysis of pumping seals upstream of incomplete liquid film[J], Journal of Beijing University of Chemical Technology (Natural Science Edition), 2016 94. DOI Zhang Yu, Li Shuangxi, Cai Jining, Zhang Qiuxiang Numerical study of magnetic fluid sealing performance of flexible pole shoe[J], Lubrication and Sealing, 2016 95. DOI Wang Haibao,Cai Jining,Zhang Qiuxiang,Li Shuangxi Optimisation of structural parameters of microwave-acidification steam explosion pretreatment reactor[J], Cellulose Science and Technology, 2016 96. DOI Yang Jing,Du Jiang,Zhao Jin,Zhang Qiuxiang,Li Shuangxi Optimisation of three-tower distillation of cellulosic fuel ethanol[J], Cellulose Science and Technology, 2016 97. DOI Du Jiang,Mo Ligen,Li Shuangxi,Cai Jining,Zhang Qiuxiang Calculation method of sealing force of soft seal globe valve based on leakage rate[J], Lubrication and Sealing, 2016 98. DOI Li Xiaofen,Cai Jining,Zhang Qiuxiang,Li Shuangxi Analysis of dynamic pressure sealing performance under mixed lubrication with low liquid-to-gas ratio[J], Lubrication and Sealing, 2016 99. DOI Wang Zongtai, Zhang Qiuxiang, Li Shuangxi, Cai Jining Research on flow-solid-thermal coupling characteristics of mechanical seal of high temperature thermal oil pump[J], Mechanical Design and Manufacturing, 2016 100. DOI Jin, Zhaoxu, Li Shuangxi, Cai, Jining, Zhang, Qiuxiang Optimizing on hydrostatic structural parameters for regulatable dry gas seal based on central composite design test[J], Industrial Lubrication andTribology, 2016 101. DOI Li Shuangxi, Huang Kesong, Cai Jining, Zhang Qiuxiang, Fu Tonghui Study on contact state and stress of end face of medium pressure mechanical seal[J], Lubrication and Seal, 2016 102. DOI Wang Yang,Zhang Qiuxiang,Li Shuangxi,Cai Jining Full life cycle experimental study of magnetic grease performance in seawater environment[J], Lubrication and Seal, 2015 103. DOI Ma Zhimeng,Cai Jining,Zhang Qiuxiang,Li Shuangxi,Zhang Yan Experimental study on standby storage performance of dynamic O-ring auxiliary seals for mechanical seals[J], Lubrication and Sealing, 2015 104. DOI Zhang Yan, Li Shuangxi, Cai Jining, Zhang Qiuxiang, Ma Zhimeng Performance study and structure optimisation of balancing device of multistage centrifugal pump[J], Fluid Machinery, 2015 105. DOI Pan Yuqing, Wang Wenya, Yuan Qipeng, Li Shuangxi, Zhang Qiuxiang Preparation of xylose from corn stover by steam blasting with sulphuric acid pre-impregnation[C], Proceedings of the Annual Meeting of the Chinese Society of Chemical Industry, 2015 106. DOI Ouyang Xianhong, Wang Wenya, Yuan Qipeng, Li Shuangxi, Zhang Qiuxiang, Zhao Pengxiang Preparation and characterisation of low molecular weight lignin from corn kernel[C], Proceedings of the Annual Meeting of the Chinese Chemical Society, 2015 107. DOI Gao Yunfeng,He Hong,Cai Jining,Li Shuangxi Research on the selection method of the number of large horizontal vessel supports[J], Petroleum and Chemical Equipment, 2015 108. DOI Wang Zongtai,Zhang Qiuxiang,Cai Jining,Huang Bingchen,Li Shuangxi Numerical analysis of thermal characteristics of mechanical seal of high temperature thermal oil pump[J], Lubrication and sealing, 2015 109. DOI Kim, Chao-Xu, Li, Shuang-Xi, Cai, Ji-Ning, Zhang, Qiu-Xiang Optimisation of static pressure structure parameters of adjustable air film lubrication seal[J], Journal of Chemical Engineering, 2015 110. doi Jin, Zhaoxu,Li Shuangxi,Cai, Ji'ning,Zhang, Qiuxiang Compound Opening Characteristics of Regulatable Dry Gas Seal[C], INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND ENVIRONMENT PROTECTION (ICSEEP2015), 2015 111. doi Gao Long, Zhang Qiuxiang, Li Shuangxi, Cai Jining, Wu Ze Research on factors affecting the effect of enzyme digestion in steam blasting pretreatment[J], Renewable Energy, 2014 112. DOI Liu Huanhuan,Zhang Qiuxiang,Li Shuangxi,Cai Jining Numerical simulation of flow field at the end face of cryogenic liquid oxygen T-slot seal[J], Mechanical Design and Manufacturing, 2014 113. DOI Li Xiyuan, Zhang Qiuxiang, Cai Jining, Li Shuangxi Numerical simulation study of pressure adaptive mechanical seal[J], Mechanical and Electrical Engineering, 2014 114. DOI Li Xiyuan, Zhang Qiuxiang, Cai Jining, Li Shuangxi Analysis of the influence of structural parameters on the performance of pressure adaptive mechanical seal[J], Petroleum and Chemical Equipment, 2014 115. DOI Pan Yuqing, Zhang Hongjia, Qiu Xueliang, Ouyang Xianhong, Wang Wenya, Li Shuangxi, Zhang Qiuxiang, Yuan Qipeng Simulation and pilot study of xylose preparation from oxalic acid pre-impregnated continuous steam-exploded corn cob[J], Journal of Process Engineering, 2014 116. DOI Liu Yan, Li Shuangxi, Cai Jining, Zhang Qiuxiang A new method for wireless measurement of tensile force and pressure on bolted parts[J], Mechanical and Electrical Engineering, 2014 117. DOI Liu Huanhuan,Zhang Qiuxiang,Li Shuangxi,Cai Jining,Li Shaobo Sealing performance of flat type non-metallic flap globe valve[J], Lubrication and sealing, 2014 118. DOI Gao Long,Zhang Qiuxiang,Li Shuangxi,Cai Jining Stress analysis of steam lift tower during lifting process[J], Chemical Machinery, 2014 119. DOI Zhang Huafu,Zhang Qiuxiang,Li Shuangxi,Cai Jining Numerical analysis of fluid-solid coupling heat transfer characteristics in an annular slit channel[J], Building Heat Ventilation and Air Conditioning, 2014 120. DOI Li Lan, Cai Jining, Li Shuangxi, Zhang Qiuxiang, Wu Lu, Bai Fengxue Nuclear radiation shielding sealing solution and performance analysis of metal bellows[J], Fluid Machinery, 2013 121. DOI Zhang Huafu,Zhang Qiuxiang,Li Shuangxi,Cai Jining Numerical analysis of magnetic field distribution within electromagnetic induction heating assembly[J], Electromechanical Engineering Technology, 2013 122. DOI Wu Ze, Zhang Qiuxiang, Li Shuangxi, Cai Jining, Zhang Hongjia Study on the performance of mixing conveyor for cellulose continuous enzymatic digestion device[J], Cellulose Science and Technology, 2013 123. DOI Cai Jining, Shi Jinxin, Li Shuangxi, Zhang Qiuxiang Study on phase change radius and influencing factors of vapour-liquid mixed-phase mechanical seal[J], Lubrication and Sealing, 2013 124. DOI Wu Lu, Zhang Qiuxiang, Cai Jining, Li Shuangxi, Li Lan Life test research on special magnetic grease seal[J], Lubrication and Seal, 2013 Awards1. GB/T33509-2017 General Specification for Mechanical Seals , 2020-11-20 00:00:00 , Social Science and Technology Rewards , Second Prize 2. Key Process and Equipment for Clean Production of Xylitol from Corn Kernel , 2016-01-14 00:00:00 , Provincial and Ministerial Science and Technology Award , Third Prize 3. Key Technology and Engineering Application of New High-end Pump Mechanical Seal , 2022-03-21 00:00:00 , Provincial and Ministerial Science and Technology Award , First Prize PatentHonor RewardAdmissions Information |