Introduction
Jiao Zhiwei is a professor/doctoral supervisor at Beijing University of Chemical Technology, and the head of the Department of Mechanical Design, Manufacturing and Automation. He was rated as a Rising Star of Science and Technology in Beijing, and was selected as a Class B talent in the 100 Young Talents Program of Beijing University of Chemical Technology and one of the Top Ten Teachers of Beijing University of Chemical Technology. He also serves as the executive deputy secretary-general of the Expert Committee of the China Plastics Association, an expert in the Chinese plastics processing industry, a member of the Expert Committee of the China Plastics Machinery Association, a member of the National Rubber and Plastic Machinery Standardization Technical Committee, and a director of the Aerospace Metamaterial/Metastructure Technology Innovation Alliance. In the past 5 years, he has undertaken and participated in the completion of scientific research projects including the National Key R&D Program, the Beijing Science and Technology Rising Star Program and its interdisciplinary projects, provincial science and technology major projects, and enterprise commissioned scientific and technological research projects, and published more than 60 papers as the first author/corresponding author, of which more than 20 are included in SCI; He has applied for more than 50 invention patents.
Research
Polymer material processing technology and equipment Principles and technologies of special additive manufacturing
Teaching
Innovative mechanical design Hydraulic and pneumatic transmissions
Funding
|
|
|
|
|
|---|
| Num | Name of project
| Project Source | Start date | Closing date | 1 | Research on the design and performance control mechanism of non-inflatable intelligent deformation tires | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2022-11-14
| 2024-10-31
| | 2 | Basic research on amorphous nanocrystalline magnetic powder 3D direct printing technology based on polymer bonding and its application | National Natural Science Foundation of China | 2022-01-01
| 2025-12-31
| | 3 | Dry-type DC capacitors are dielectric film materials | National Key Research and Development Program of China | 2021-12-01 | 2025-11-30 | | 4 | Study on the influencing mechanism of osteogenic activity of 3D printing degradable spinal interbody fusion device | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2021-12-01
| 2024-12-31 | | 5 | Application and development of lamination technology in polymer materials | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2021-07-01
| 2023-06-30 | | 6 | Design and research of self-sensing soft body gripper for space debris capture | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2020-09-01 | 2023-08-31 | | 7 | Key technologies and industrialization of reusable protective masks | National Key Research and Development Program of China | 2020-02-01 | 2020-06-30 | | 8 | Large-scale electro-hydraulic hybrid injection molding technology and equipment | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2019-12-25
| 2020-12-31 | | 9 | Ultra-high-performance tires, full electromagnetic induction heating, direct pressure vulcanization, intelligent manufacturing complete sets of technology and equipment | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2019-11-21
| 2021-12-31 | | 10 | R&D and application demonstration of high-performance polymers and their composite materials for additive manufacturing | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2018-07-01
| 2021-06-30 | | 11 | Key technologies for the preparation of high-performance polyvinyl chloride | National Key Research and Development Program of China | 2016-07-01
| 2020-06-30
| | 12 | R&D and industrialization of polymer high-performance and high-efficiency 3D printing molding equipment based on DLP and FDM principles | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2016-01-01 | 2018-12-31
| | 13 | Mechanism and regulation mechanism of polymer melt droplet stacking free forming | National Natural Science Foundation of China | 2015-01-01
| 2017-12-31 | | 14 | Ningbo CNC generation of mechanical product innovation and application demonstration-1 | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2015-01-01 | 2016-12-31 | 15
| Ningbo CNC generation of mechanical product innovation and application demonstration-2 | Projects of Ministries, Provinces, Municipalities and Autonomous Regions | 2014-12-01 | 2016-12-31
| | 16 | National Engineering Laboratory for Tire Design and Manufacturing Process | National Development and Reform Commission | 2011-08-07
| 2016-12-31 |
Publications
Paper:
| Num | Title | Publication | Index source
| Order of authorship | | 1 | Hardness and modulus programmable tuning for silicone 3D printing device and experiment | Rapid Prototyping Journal,29,1536-1545, 2023 | SCI | Lead Author | | 2 | Polymer/LMPA for manufacturing deformable structure by coaxial printing | Journal of Applied Polymer Science，1-8，2023 | SCI | Corresponding Author | | 3 | 3D-Printed Hierarchically Micro–Nano-structured NiFe Catalysts for the Stable and Efficient Oxygen Evolution Reaction | ACS Appl. Nano Mater ,6, 4602−4609,2023 | SCI | The Third Author | | 4 | Lightweight Dual-Mode Soft Actuator Fabricated from Bellows and Foam Material | Actuators, 11,245-264, 2022 | SCI | Lead Author | | 5 | A Soft Electro-Hydraulic Pneumatic Actuator with elf-Sensing Capability toward Multi-Modal Haptic Feedback | Actuators,11,74-89,2022 | SCI | Corresponding Author | | 6 | Study on Direct Writing of Gallium Metal for the Flexible Sensor | Advances in Materials Science and Engineering, 2021:1-10,2021 | SCI | Corresponding Author | | 7 | Low-temperature thermoplastic welding of metallic glass ribbons for in-space manufacturing | ScienceChinaMaterials, 64, 979-986,2021 | SCI | Corresponding Author | | 8 | Thermal oxidation-electroreduction modified 3D NiCu for efficient alkaline hydrogen evolution reaction | International Journal of Hydrogen Energy, 46,22292-22302,2021 | SCI | Corresponding Author | | 9 | A Haptic Feedback Actuator Suitable for the Soft Wearable Device | Applied Sciences,10,8827-8839,2020 | SCI | Lead Author& Corresponding Author | | 10 | A Jumping Robot Driven by a Dielectric Elastomer Actuator | Applied Sciences,10,2241-2252,2020 | SCI | Lead Author &Corresponding Author | | 11 | A Crawling Soft Robot Driven by Pneumatic Foldable Actuators Based on Miura-Ori | Actuators,9,26,2020 | SCI | Corresponding Author | | 12 | The forming process of polymer melt droplet deposition three-dimensional printing | Polymer Engineering and Science, 60,1866-1876, 2020 | SCI | Corresponding Author | | 13 | Research on Tire Marking Point Completeness Evaluation Based on K-Means Clustering Image Segmentation | Sensors,20,4687,2020 | SCI | Corresponding Author | | 14 | Preparation and Optical Properties of Nd 3+ -doped ZnO-MgO-Al2O3-SiO2 Glass-ceramics | Journal of Ceramics, 45,749-753,2021 | SCI | Lead Author& Corresponding Author | | 15 | Comprehensive Assessment of the Environmental Impact of Fused Filament Fabrication Products Produced | Journal of The Institution of Engineers (India): Series C, 102,59-73,2021 | EI | Corresponding Author | | 16 | 3D printing of HA/PCL composite tissue engineering scaffolds | Advanced Industrial and Engineering Polymer Research,2,196-202,2019 | EI | Lead Author |
Monograph：
| Num | Title
| Publisher | Publication date
| | 1 | Polymer additive manufacturing technology | Chemical Industry Press | 2020-10-01 | | 2 | Robot Intelligence Technology and Applications 3 | Springer | 2015-10-31 | | 3 | Manual of Plastic Machinery Design and Selection | Chemical Industry Press | 2015-04-01 |
Awards
49″-63″giant tire ultra-wide rubber blank extrusion molding key process and equipment -Second Prize of Social science and technology awards Molding process and equipment for large-scale and complex plastic parts of urban underground pipe network -Second Prize of Social science and technology awards Complete set of technology and equipment for biaxial tensile orientation enhancement of polymer materials -Second Prize of Social science and technology awards Key processes and equipment for giant radial ultra-wide rubber embryo extrusion -Second Prize of Social science and technology awards Complete set of technology and equipment for biaxial tensile orientation enhancement of polymer materials -First Prize of Social science and technology awards Molding process and equipment for large-scale thick-walled and complex structural plastic parts -Second Prize of Social science and technology awards R&D and industrialization of green and intelligent large-scale pure two-platen plastic injection molding equipment -First Prize of Social science and technology awards Production technology and equipment of plant fiber and polymer composite extrusion decorative profiles -Second Prize of Ministerial and Provincial-Level Science and Technology Awards Complete set of technology and equipment for biaxial tensile orientation enhancement of polymer materials -Ministerial and Provincial-Level Science and Technology Awards R&D and industrialization of shape control technology and molding equipment for optical-grade plastic parts -First Prize of Social science and technology awards Polymer melt differential 3D printing molding technology and equipme -Second Prize of Social science and technology awards
|
