Dangkaifang头像

Dangkaifang

Associate professor

Research direction:

Education:

  • Department:
  • ORCID:
  • DBLP:

10 Access

  • Email:
  • Office :

Introduction


Educational background:

2000.9-2003.11,Xian Jiaotong University, Mechanical Engineering, Mechanical and Electronic Engineering, PhD

1997.9-2000.4, Xian Jiaotong University, Master of Mechanical Engineering

 

Work Experience:

2004.2--present Beijing University of Chemical Technology, Teacher

2013.11-2014.11 Texas A&M University, Visiting scholar

1993.7-1997.8 Xian Yuandong Group, Engineer


Education

Work Experience

Social Position

Social Activities

Research

Research FieldsIntelligent controlAdvanced molding of polymer materialsRobot control system


Teaching

Mechatronics

The C Programming Language

Testing Technology

Principles and Applications of Programmable Logic Controllers 

Sensors & Intelligent Testing Technology

Postgraduates

Funding

Vertical Project

Horizontal Project

Publications

 

[1]    Wang X, Ma Y, Dang K, Zhao B, Chen A, Yang W, Xie P. Fault diagnosis of injection molding machine non-return valve based on data-driven model. Journal of Manufacturing Processes[J], 2024, 117: 145-153.

[2]    Ma Y, Wang X, Dang K, Zhou Y, Yang W, Xie P. Intelligent recommendation system of the injection molding process parameters based on CAE simulation, process window, and machine learning[J]. The International Journal of Advanced Manufacturing Technology, 2023, 128(9-10): 4703-4716.

[3]    Ma Y, Xu Y, Dang K, Fu N, Jiao X, Xie P, Yang W. Study on the evaluation and compensating strategy for the wear damage of non-return valve during injection molding process[J]. Polymer Engineering & Science, 2023, 63(3): 811-820.

[4]    Chen J, Wang R, Dang K, E P, Yang W. Improving bonding strength of metal‐plastic interface through multilevel microporous undercut structure[J]. Journal of Applied Polymer Science, 2023, 140(1): e53276.

[5]    焦晓龙,党开放,周洋,马艺涛,王金领,谢鹏程.从德国K2022看注塑产业发展新趋势[J].中国塑料, 2024,38(1):49.

[6]    毛海军,马艺涛,党开放,.注塑模具温度智能化控制研究进展[J].中国塑料,2024,38(01):100-105.

[7]    王新铭,党开放,马艺涛,.注塑机故障诊断技术进展[J].塑料工业,2023,51(11):15-20.

[8]    许宇轩,党开放,傅南红,.注射成型工艺自适应优化技术研究进展[J].中国塑料,2022,36(09):180-186.

[9]    Xie P, Chen J, Ye B, Wang R, Dang K, Yang W, Ostrikov K. Plasma sprayed thermal barrier coatings: Effects of polyamide additive on injection molding part quality[J]. Journal of Applied Polymer Science, 2024, 139(16): 51980.

[10]Xu Y, Liu G, Dang K, Fu N, Jiao X, Wang J, Xie P, Yang W. A novel strategy to determine the optimal clamp force based on the clamp force change during injection molding[J]. Polymer Engineering & Science, 2021, 61(12): 3170-3178.

[11]Chen J, Chi W, Dang K, Xie P, Yang W. Improving appearance quality of injection molded microcellular parts through mold coating of PTFE and zirconia[J]. Journal of Applied Polymer Science, 2021, 138(33): 50828.

[12]党开放,黄泓鑫,武高健,.PLA/PBAT/PTFE原位成纤复合材料微孔发泡行为及性能[J].塑料工业,2021,49(08):61-65.

[13]Wu G, Xie P, Yang H, Dang K, Xu Y, Sain M, Turng L.S., Yang W. A review of thermoplastic polymer foams for functional applications[J]. Journal of Materials Science, 2021, 56: 11579-11604.

[14]Wu G, Xu Y, Chen J, Dang K, Yang W, Xie P. In situ fibrillation‐reinforced polypropylene‐based multi‐component foams[J]. Polymers for Advanced Technologies, 2021, 32(10): 4052-4060.

[15]Song L, Wang X, Xie P, Ding Y, Dang K, Yang W. Dissolution window in in situ polymerization preparation of polyamide single‐polymer composites[J]. Polymer Engineering & Science, 2021, 61(6): 1662-1672.

[16]尹芳放,党开放,杨卫民,.基于可靠性的中空板结构-功能一体化设计与性能研究[J].中国塑料,2021,35(02):52-57.

[17]Yin F, Dang K, Yang W, Ding Y, Xie P. An efficient approach to reliability-based topology optimization for the structural lightweight design of planar continuum structures[J]. Journal of Mechanics, 2021, 37: 270-281.

[18]Kaifang D, Zhiqiang J. Microstructure evolution and properties of a laser cladded Ni-Based WC reinforced composite coating[J]. Materials Testing, 2020, 62(11): 1078-1084.

[19]Yin F, Dang K, Yang W, Ding Y, Xie P. Feature-integrated structural optimization design method and performance evaluation for hollow slab structures[J]. IEEE Access, 2020, 8: 220450-220460.

[20]张姗姗,党开放,焦志伟,.嵌入形状记忆聚合物的柔性致动器仿真及性能测试[J].塑料科技,2019,47(08):65-70.

[21]张姗姗,党开放,焦志伟,.形状记忆聚合物的表征方法及其软体机器人适用性研究[J].塑料工业,2019,47(07):130-133+151.

[22]邢鑫磊,张富平,党开放.煤焦油陶瓷膜净化处理技术的应用研究[J].石油炼制与化工,2018,49(06):42-45.

[23]李哲,党开放,黄矫燕,.S曲线加减速控制在3D打印中的实现[J].组合机床与自动化加工技术,2017,(08):97-99+104.


Awards

Patent

Honor Reward

Admissions Information